NEC Univerge sv8500 Manual page 1926

5=Route Config Data
9=Exit
Select a reference number:0
Ether[1]
MAC Address:00-00-00-00-00-00
Ether[2]
MAC Address:00-00-00-00-00-00
[DRS configuration data]
MG(SIP)> show config
[2009-03-05 14:49:29]
[SP-3987:01.00.00.00]
0=MAC Data
1=DRS Data
2=Common Config Data
3=Port Config Data
4=SIP Config Data
5=Route Config Data
9=Exit
Select a reference number:1
Primary DRS IP Address:0. 0. 0. 0:PortNo[3456]
Secondary DRS IP Address:0. 0. 0. 0:PortNo[3456]
Tertiary DRS IP Address:0. 0. 0. 0:PortNo[3456]
Quaternary DRS IP Address:0. 0. 0. 0:PortNo[3456]
[Common configuration data]
MG(SIP)> show config
VOL.2-1673
MG-SIP96
Route Config Data=Route infor-
mation configuration data
End of show command
Select "0".
MAC addresses of Ether [1] [2]
of MG-SIP96
Time when the configuration is
acquired.
Software version information of
MG-SIP96
MAC Data=MAC configuration
data
DRSData=Configuration data of
the Telephony Server
Common Config Data=Common
configuration data
Port Config Data=Port configura-
tion data
SIP Config Data=SIP configura-
tion data
Route Config Data=Route infor-
mation configuration data
End of show command
Select "1".
IP address and port number of the
currently configured DRS will be
displayed.