Character Parameter - Agilent Technologies 4155C Command Reference Manual

Functional Syntax Conventions
Parameter Types

Character Parameter

A character parameter type is for command parameters that have a specific number
of allowed settings. For example, the allowed parameters for
:PAGE:CHAN:CDEF:MODE command are SWEep and SAMPling.
Figure 1-6 Character Parameter
Many <program mnemonic>s have a long form and a short form. For example, you
can use SWE as short form of SWEEP.
<program mnemonic> is not case sensitive. For example, the following have the
same meaning:
:PAGE:CHAN:MODE SWEEP
:PAGE:CHAN:MODE Sweep
Agilent 4155C/4156C SCPI Command Reference, Edition 1 1-9