Page:display:analysis:line(1|2):Point(1|2):Y - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter
Query response
SCPI Commands

:PAGE:DISPlay:ANALysis:LINE(1|2):POINt(1|2):Y

:PAGE:DISPlay:ANALysis:LINE(1|2):POINt(1|2):Y
This command specifies the Y coordinate of the desired point.
If POINt(1|2):MODE is OPLot (not XY), this parameter is ignored.
At *RST, this value is undefined.
:PAGE:DISPlay:ANALysis:LINE(1 | 2):POINt(1 | 2):Y y_expression
Parameter Type
y_expression string
y_value <newline><^END>
y_value is string response data, but does not contain double quote characters at the
beginning and end of the string.
OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:POIN1:Y '0.1'"
OUTPUT @Hp4155;":PAGE:DISP:ANAL:LINE1:POIN1:Y?"
ENTER @Hp4155;A$
:PAGE:DISPlay:ANALysis:LINE(1|2):TANGent:AFTer
This command specifies the start position (TANG:AFT var_name, expr) to search
for the point (TANG:POS var_name, expr) at which to draw the tangent line.
If LINE(1|2):MODE is not TANGent, this parameter is ignored.
At *RST, this value is undefined.
:PAGE:DISPlay:ANALysis:LINE(1 | 2):TANGent:AFTer var_name, expr
Parameter Type
var_name string
expr string
var_name, expr <newline><^END>
5-116 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
expression of the Y coordinate point
Explanation
data variable name
condition expression