Format Subsystem - Agilent Technologies 4155C Command Reference Manual

SCPI Commands

FORMat Subsystem

The FORMat subsystem sets a data format for transferring numeric and array
information.
This data format is used for both command and response data by those commands
that are specifically designated to be affected by the FORMat subsystem. The
designation is either given as part of a command description, or in the definition of
block or array data used by a command.
The data format for command data may override the definition of FORMat if the
data received is self typing (indicates its type), for the duration of that data transfer.
The following table is the command tree of FORMat subsystem.
Command
:FORMat
:BORDer
[:DATA]
5-30 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Parameter
NORMal | SWAPped
ASCii | REAL{,<length>}