Hcopy:item[:Window]:Trace:graticule:state; Hcopy:item[:Window]:Trace[:Immediate] - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Example
SCPI Commands

:HCOPy:ITEM[:WINDow]:TRACe:GRATicule:STATe

:HCOPy:ITEM[:WINDow]:TRACe:GRATicule:STATe
This command sets whether the frame and grid on the GRAPH/LIST: GRAPHICS
page (GRAPH FRAMEGRID) should be plotted or printed when the
HCOPy:IMMediate command or HCOPy:DATA? query is sent.
At RST, the value of this parameter is ON.
:HCOPy:ITEM [ :WINDow] :TRACe:GRATicule:STATe OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
This command has meaning only when :HCOPy:DEVice:LANGuage is set to
HP-GL. If set to PCL, GRAPH FRAMEGRID is always printed or plotted.
0 | 1 <newline><^END>
OUTPUT @Hp4155;":HCOP:ITEM:TRAC:GRAT:STAT ON"
OUTPUT @Hp4155;":HCOP:ITEM:TRAC:GRAT:STAT?"
ENTER @Hp4155;A

:HCOPy:ITEM[:WINDow]:TRACe[:IMMediate]

This command immediately plots or print outs the graphics plot curve of the
GRAPH/LIST: GRAPHICS page.
This command also changes the current display to GRAPH/LIST: GRAPHICS page.
This command does not have query form.
:HCOPy:ITEM [ :WINDow] :TRACe [ :IMMediate]
OUTPUT @Hp4155;":HCOP:ITEM:TRAC"
5-50 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
GRAPH FRAMEGRID is not plotted or printed.
GRAPH FRAMEGRID is plotted or printed.