Agilent Technologies 4155C Command Reference Manual page 418

Error -123
Error -124
Error -128
Error -130
Error -131
Error -134
Error -138
Error -140
Error -141
Error -144
Error -148
Error Messages
Command Error
Exponent too large
The magnitude of the exponent was larger than 32000.
Too many digits
The mantissa of a decimal numeric data contained more than 255 digits excluding
leading zeros.
Numeric data not allowed
Numeric data is not allowed in this position for this command.
Suffix error
An error was detected in the suffix. This error message is reported if the
4155C/4156C cannot determine the more specific suffix errors -131 through -138.
Invalid suffix
The suffix does not follow the correct syntax or the suffix is inappropriate.
Suffix too long
The suffix contains more than 12 characters.
Suffix not allowed
A suffix was received after a numeric parameter that does not allow suffixes.
Character data error
An error was detected in a character parameter. This error message is reported if the
4155C/4156C cannot determine the more specific errors -141 through -148.
Invalid character data
Either the character parameter contains an invalid character or the particular element
received is not valid for the command header.
Character data too long
The character parameter contains more than 12 characters.
Character data not allowed
A character parameter is not allowed for this position.
6-6 Agilent 4155C/4156C SCPI Command Reference, Edition 1