Page:ksweep:display:direction:y - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter
Query response
Example

:PAGE:KSWeep:DISPlay:DIRection:Y

This command sets the display direction of the Y axis for knob sweep.
At *RST, this value is NORMal.
:PAGE:KSWeep:DISPlay:DIRection:Y NORMal | REVerse
Parameter Type
NORMal character
REVerse character
NORM | REV <newline><^END>
OUTPUT @Hp4155;":PAGE:KSW:DISP:DIR:Y NORM"
OUTPUT @Hp4155;":PAGE:KSW:DISP:DIR:Y?"
ENTER @Hp4155;A$
:PAGE:KSWeep:DISPlay:GRID
This command selects whether the grid of graph is on or off for knob sweep.
At *RST, this value is ON.
:PAGE:KSWeep:DISPlay:GRID OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":PAGE:KSW:DISP:GRID ON"
OUTPUT @Hp4155;":PAGE:KSW:DISP:GRID?"
ENTER @Hp4155;A
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:KSWeep:DISPlay:DIRection:Y
Explanation
Lowermost point on Y axis is minimum value.
Uppermost point on Y axis is minimum value.
Explanation
grid is off
grid is on
SCPI Commands
5-151