Page:stress[:Cdefinition]:Selector<N>:Measure - Agilent Technologies 4155C Command Reference Manual

Query response
Example
Syntax
Parameter
Query response
Example
name <newline><^END>
name is string response data, but does not contain double quote characters at the
beginning and end of the string.
OUTPUT @Hp4155;":PAGE:STR:PGU1:NAME 'VD'"
OUTPUT @Hp4155;":PAGE:STR:PGU1:NAME?"
ENTER @Hp4155;A$
:PAGE:STRess[:CDEFinition]:SELector<n>:MEASure
This command selects the relay connection mode of Agilent 16440A SMU/PGU
selector for measurement state.
<n> is required to specify the SMU/PGU selector number. Valid SMU/PGU selector
numbers are SELector1 through SELector4.
At *RST, this value is OPEN.
:PAGE:STRess [ :CDEFinition] :SELector<n>:MEASure SMU | PGU | OPEN |
POPen
Parameter Type
SMU character
PGU character
OPEN character
POPen character
SMU | PGU | OPEN | POP <newline><^END>
OUTPUT @Hp4155;":PAGE:STR:SEL1:MEAS SMU"
OUTPUT @Hp4155;":PAGE:STR:SEL1:MEAS?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:STRess[:CDEFinition]:SELector<n>:MEASure
connect to SMU port
connect to PGU port
disconnect all
disconnect all, but disconnect PGU port with
semiconductor switch, not normal switch. This
parameter is valid only for selector 1 and 3.
SCPI Commands
Explanation
5-255