Hcopy:item[:Window]:Trace:data - Agilent Technologies 4155C Command Reference Manual

Parameter
Query response
Example
Syntax
Query response
Example
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":HCOP:ITEM:TEXT3:STAT ON"
OUTPUT @Hp4155;":HCOP:ITEM:TEXT3:STAT?"
ENTER @Hp4155;A

:HCOPy:ITEM[:WINDow]:TRACe:DATA?

This command returns hardcopy (PCL or HP-GL) data of the graphics plot curve on
the GRAPH/LIST: GRAPHICS page.
This command also changes the current display to GRAPH/LIST: GRAPHICS page.
This command has query form only.
:HCOPy:ITEM [ :WINDow] :TRACe:DATA?
#0{data element} <newline><^END>
Refer to Programmer's Guide
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:HCOPy:ITEM[:WINDow]:TRACe:DATA?
Explanation
Measurement setup data is not plotted or printed.
Measurement setup data is plotted or printed.
SCPI Commands
5-49