Mmemory:cdirectory - Agilent Technologies 4155C Command Reference Manual

Example
See also
Syntax
Parameter
Query response
Example
See also
SCPI Commands

:MMEMory:CDIRectory

The following two examples show the same result.
OUTPUT @Hp4155;":MMEM:CAT?"
ENTER @Hp4155;A,B,C$
OUTPUT @Hp4155;":MMEM:CAT? 'DISK'"
ENTER @Hp4155;A,B,C$
:MMEMory:DESTination
:MMEMory:CDIRectory
This command changes the working directory on the NFS server specified by
:MMEM:DEST command.
Before entering this command, the :MMEM:DEST command must set the present
mass storage device to NET1, NET2, NET3 or NET4.
Query returns the present working directory.
:MMEMory:CDIRectory dir_name [ , msus ]
Parameter Type
dir_name string
msus string
directory <newline><^END>
directory means the present working directory.
The following two examples produce the same result.
OUTPUT @Hp4155;":MMEM:CDIR 'next_dir'"
OUTPUT @Hp4155;":MMEM:CDIR 'next_dir','DISK'"
Query Example:
OUTPUT @Hp4155;":MMEM:CDIR?"
ENTER @Hp4155;A$
:MMEMory:DESTination
5-64 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
Next working directory name
mass storage (Only 'DISK' can be entered as the
value)