Page:glist[:Graphics]:Line:gradient - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter

:PAGE:GLISt[:GRAPhics]:LINE:GRADient

This command sets the gradient value of line.
If LINE:LSELect is NONE, this command is ignored.
At *RST, this value is undefined.
:PAGE:GLISt [ :GRAPhics] :LINE:GRADient gradient
Parameter Type
gradient numeric
gradient <newline><^END>
gradient is NR3 response data type.
OUTPUT @Hp4155;":PAGE:GLIS:LINE:GRAD 1.5"
OUTPUT @Hp4155;":PAGE:GLIS:LINE:GRAD?"
ENTER @Hp4155;A
:PAGE:GLISt[:GRAPhics]:LINE:LSELect
This command selects the line to operate on.
At *RST, this value is NONE.
:PAGE:GLISt [ :GRAPhics] :LINE:LSELect LINE1 | LINE2 | NONE |
line_number | MINimum | MAXimum
Parameter Type
character
LINE1
character
LINE2
character
NONE
line_number numeric
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:GLISt[:GRAPhics]:LINE:GRADient
Explanation
gradient value of line
Explanation
line 1 is selected
line 2 is selected
no lines are selected
1 or 2
SCPI Commands
5-139