Data|:Trace:status - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
SCPI Commands

:DATA|:TRACe:STATus?

:DATA|:TRACe:STATus?
This command returns the status of the specified data variable.
This command has query form only.
:DATA | :TRACe:STATus? data_variable_name
Parameter
data_variable_name
status <newline><^END>
bit binary-weight
0 1
1 2
2 4
3 8
4 16
5 32
6 64
7 128
8 to 15
If the ASCii transfer format was selected by the FORMat subsystem, status is an
integer value that is the sum of the binary-weighted values for the bits in NR1
response data format.
If the REAL transfer format was selected by the FORMat subsystem, status is
definite length block data with 16-bit integer format. The length of the returned
block depends on the specified data_variable_name.
OUTPUT @Hp4155;":TRAC:STAT? 'Vdata'"
ENTER @Hp4155;A(*)
5-16 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Type
string or data variable name
character
Stack Register Overflow
Calculation error
Insufficient data
Not used (always 0)
A/D converter overflow occurs.
SMU or VSU oscillates.
Other SMU reaches its compliance setting.
This SMU reaches its compliance setting.
Not used (always 0)
Explanation
description