Trace Measure S-Parameter - Agilent Technologies U3025AE10 User Manual

U3025AE10
Select the Port Control down arrow for Ports 9 through 12.
Figure 17

Trace Measure S-Parameter

S-Parameter selection can be accomplished using Response > Measure. Use the
drop-down menus to select 1 of 144 S-Parameters for the 12-Port system. The first number
in the Sxx selection is the Receiver Port and the second number will be the Source Port.
Any port can be selected to be the Receiver, Source or both, as in S11. The front panel R
LED indicates the port is the Receiver and the S LED indicates the port is the Source.
Figure 18
20
This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html
External Test Set U302xAE10 (Port 9 - 12)
12-Port Trace Measure
Controlling the System with E8363/4C and N5230C
User's Guide U3025-90001