Page:measure:qscv:lname - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Example
See also

:PAGE:MEASure:QSCV:LNAMe

This command sets the variable name of the leakage current data measured during
the Quasi-static CV measurements. This command also has a query form.
At *RST, this value is set to LEAK.
:PAGE:MEASure:QSCV:LNAMe name
:PAGE:MEASure:QSCV:LNAMe?
Parameter Type
name string
name <newline><^END>
OUTPUT @Hp4155;":PAGE:MEAS:QSCV:LNAME 'ILEAK'"
OUTPUT @Hp4155;":PAGE:MEAS:QSCV:LNAME?"
ENTER @Hp4155;A$
:PAGE:MEASure:QSCV[:MENU]
This command displays the MEASURE: QSCV SETUP screen.
Available only in the Quasi-static CV measurement mode. An error occurs if this
command is entered in another measurement mode.
:PAGE:MEASure:QSCV[:MENU]
OUTPUT @Hp4155;":PAGE:MEAS:QSCV"
:PAGE:CHANnels:CDEFinition:MODE
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:MEASure:QSCV:LNAMe
Explanation
String of up to 6 alphanumeric characters.
The first character must be an alpha character.
SCPI Commands
5-197