Hcopy:device:cmod - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
NOTE
Query response
Example
SCPI Commands

:HCOPy:DEVice:CMOD

:HCOPy:DEVice:CMOD
This command selects color mode for hardcopy.
At *RST, the value of this parameter is BW.
:HCOPy:DEVice:CMOD BW | FULL | FIX
Parameter Type
BW character
FULL character
FIX character
FIX mode
By PCL color printer, you can make a color copy that uses eight fixed colors: black,
red, green, yellow, blue, magenta, cyan, and white.
You can change the color to print or pen assignment for each screen item by using
the SYSTEM: COLOR SETUP page. For details, refer to "SYSTEM: COLOR
SETUP screen" in Chapter 5 of User's Guide: General Information.
Although this mode allows only the eight fixed colors, this mode is also available
for HP-GL or PCL printers that have sixteen color capability.
BW | FULL | FIX <newline><^END>
OUTPUT @Hp4155;":HCOP:DEV:CMOD FIX"
OUTPUT @Hp4155;":HCOP:DEV:CMOD?"
ENTER @Hp4155;A$
5-38 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
monochrome mode
color mode for HP-GL or PCL printers that have
sixteen color capability, for example, HP DeskJet
1200C and HP PaintJet. You can make a color
print that has exactly the same colors as display.
color mode for HP-GL pen plotters and PCL color
printers that have only eight color capability, for
example, HP DeskJet 500C, 550C, and 560C.