Page:measure[:Sweep]:Vard:compliance - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
SCPI Commands

:PAGE:MEASure[:SWEep]:VARD:COMPliance

:PAGE:MEASure[:SWEep]:VARD:COMPliance
This command sets the COMPLIANCE value of VAR1'.
If the unit type of VAR1' is VSU, this parameter is ignored.
You use this command only if there is an SMU whose function (FCTN) is VAR1'.
:PAGE:MEASure [ :SWEep] :VARD:COMPliance compliance | MINimum |
MAXimum
Parameter Type
compliance numeric
compliance <newline><^END>
compliance is NR3 response data type.
OUTPUT @Hp4155;":PAGE:MEAS:VARD:COMP 2"
OUTPUT @Hp4155;":PAGE:MEAS:VARD:COMP MAX"
OUTPUT @Hp4155;":PAGE:MEAS:VARD:COMP?"
ENTER @Hp4155;A
OUTPUT @Hp4155;":PAGE:MEAS:VARD:COMP? MAX"
ENTER @Hp4155;A
5-236 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
-200 to 200 V or -1 to 1 A. The range of this value
depends on SMU type of VAR1'.