Syntax
Parameter
Query response
Example
:PAGE:MEASure:MSETup:SMU<n>|:VMU<n>:RANGe:MODE
:PAGE:MEASure:MSETup:SMU<n>|:VMU<n>:RAN
Ge:MODE
This command selects the ranging MODE of SMU<n> or VMU<n>.
<n> is required to specify SMU or VMU number. Valid numbers are SMU1 through
SMU6 (depending on the configuration) and VMU1 through VMU2.
The specified SMU or VMU must not be DISable.
:PAGE:MEASure:MSETup:SMU<n> | :VMU<n>:RANGe:MODE AUTO | FIXed |
LIMited
Parameter
Type
AUTO
character
FIXed
character
LIMited
character
AUTO | FIX | LIM <newline><^END>
OUTPUT @Hp4155;":PAGE:MEAS:MSET:SMU1:RANG:MODE AUTO"
OUTPUT @Hp4155;":PAGE:MEAS:MSET:SMU1:RANG:MODE?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
auto range mode
fixed range mode
limited auto range mode
SCPI Commands
5-171