System:communicate:network:printer:net:textoption - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
SCPI Commands

:SYSTem:COMMunicate:NETwork:PRINter:NET:TEXToption

:SYSTem:COMMunicate:NETwork:PRINter:NET:TE
XToption
This command is one of the commands to register the network printer setup. To
register a printer setup, the following commands must be entered:
• :SYSTem:COMMunicate:NETwork:PRINter:NET:NAME
• :SYSTem:COMMunicate:NETwork:PRINter:NET:IPADdress
• :SYSTem:COMMunicate:NETwork:PRINter:NET:TEXToption
• :SYSTem:COMMunicate:NETwork:PRINter:NET:GRAPhoption
• :SYSTem:COMMunicate:NETwork:PRINter:NET:TYPE
• :SYSTem:COMMunicate:NETwork:PRINter:SET
You can register maximum 4 setups.
This command sets the text output option of lpr command which is sent to a remote
printer via your print server.
If you do not enter the :SYST:COMM:NET:PRIN:SET command, *RST clears this
setting. Query returns the present setting.
:SYSTem:COMMunicate:NETwork:PRINter:NET:TEXToption option
Parameter Type
option string
option <newline><^END>
OUTPUT @Hp4155;":SYST:COMM:NET:PRIN:NET:TEXT '-h'"
OUTPUT @Hp4155;":SYST:COMM:NET:PRIN:NET:TEXT?"
ENTER @Hp4155;A$
5-312 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
Text output option of lpr command.