Page:display[:Setup]:List[:Select] - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Example

:PAGE:DISPlay[:SETup]:LIST[:SELect]

This command selects the variable names for LIST display.
You can display a maximum of eight variables in the list. If this limit is exceeded,
Cannot define more than 8 data vars in lists.
generated.
On the DISPLAY:DISPLAY SETUP page, this command fills the blank LIST fields
in the specified order.
At *RST, no variable is selected.
:PAGE:DISPlay [ :SETup] :LIST [ :SELect] var_name { ,var_name}
Parameter Type
var_name string
var_name <newline><^END>
var_name is a list of variable names separated by commas, and is string response
data, but does not contain double quote characters at the beginning and end of the
string.
OUTPUT @Hp4155;":PAGE:DISP:LIST 'VD','VG'"
OUTPUT @Hp4155;":PAGE:DISP:LIST?"
ENTER @Hp4155;A$
:PAGE:DISPlay[:SETup][:MENU]
This command changes the present display page to DISPLAY: DISPLAY SETUP.
This command does not have query form.
:PAGE:DISPlay [ :SETup] [ :MENU]
OUTPUT @Hp4155;":PAGE:DISP"
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:DISPlay[:SETup]:LIST[:SELect]
Explanation
data variable name
SCPI Commands
error (-183) is
5-129