System:communicate:network:printer:net:ipaddress - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
SCPI Commands

:SYSTem:COMMunicate:NETwork:PRINter:NET:IPADdress

:SYSTem:COMMunicate:NETwork:PRINter:NET:IPA
Ddress
This command is one of the commands to register the network printer setup. To
register a printer setup, the following commands must be entered:
• :SYSTem:COMMunicate:NETwork:PRINter:NET:NAME
• :SYSTem:COMMunicate:NETwork:PRINter:NET:IPADdress
• :SYSTem:COMMunicate:NETwork:PRINter:NET:TEXToption
• :SYSTem:COMMunicate:NETwork:PRINter:NET:GRAPhoption
• :SYSTem:COMMunicate:NETwork:PRINter:NET:TYPE
• :SYSTem:COMMunicate:NETwork:PRINter:SET
You can register maximum 4 setups.
This command sets the IP address of the print server.
If you do not enter the :SYST:COMM:NET:PRIN:SET command, *RST clears this
setting. Query returns the present setting.
:SYSTem:COMMunicate:NETwork:PRINter:NET:IPADdress ipaddress
Parameter Type
ipaddress string
ipaddress <newline><^END>
OUTPUT @Hp4155;":SYST:COMM:NET:PRIN:NET:IPAD '172.0.0.2'
"
OUTPUT @Hp4155;":SYST:COMM:NET:PRIN:NET:IPAD?"
ENTER @Hp4155;A$
5-310 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
IP address of the print server.