Page:glist[:Graphics]:Line[:State] - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter
Query response

:PAGE:GLISt[:GRAPhics]:LINE[:STATe]

This command selects the state of line.
At *RST, this value is not defined.
:PAGE:GLISt [ :GRAPhics] :LINE [ :STATe] OFF | ON
Parameter Type
OFF character
ON character
OFF | ON <newline><^END>
OUTPUT @Hp4155;":PAGE:GLIS:LINE ON"
OUTPUT @Hp4155;":PAGE:GLIS:LINE?"
ENTER @Hp4155;A$
:PAGE:GLISt[:GRAPhics]:MARKer:DIRect:X|:Y1|:Y2
This command moves the marker to the point that has the specified X, Y1, or Y2
value.
For the query response, the returned data is the X, Y1, or Y2 value of the present
marker position.
Variable name must be assigned to the specified axis by using
:PAGE:DISP:GRAP:X|:Y1|:Y2:NAME command.
At *RST, this value is undefined.
:PAGE:GLISt [ :GRAPhics] :MARKer:DIRect:X|:Y1|:Y2 value | MINimum |
MAXimum
Parameter Type
value numeric
value <newline><^END>
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:GLISt[:GRAPhics]:LINE[:STATe]
Explanation
line is not displayed
line is displayed, and can be operated on
Explanation
x, y1, or y2 coordinate value
SCPI Commands
5-141