Diagnostic:test:abort; Diagnostic:test:continue - Agilent Technologies 4155C Command Reference Manual

Syntax
Example
Syntax
Example

:DIAGnostic:TEST:ABORt

This command forcibly terminates the diagnostics operation.
This command may set the Operation Complete flag to true since it terminates the
executing diagnostics operation.
This command does not have query form.
:DIAGnostic:TEST:ABORt
OUTPUT @Hp4155;":DIAG:TEST:ABOR"

:DIAGnostic:TEST:CONTinue

This command is used for interactive testing.
For interactive testing, operation pauses to wait for operation by user.
This command continues the test from pause status.
This command does not have query form.
:DIAGnostic:TEST:CONTinue
OUTPUT @Hp4155;":DIAG:TEST:RES?"
ENTER @Hp4155;A
IF A=-1 THEN !-1 means pause status(waiting to continue)
OUTPUT @Hp4155;":DIAG:TEST:CONT"
END IF
Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:DIAGnostic:TEST:ABORt
5-19