Sre - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Semantics

*SRE

This command sets the Service Request "Enable" Register bits.
1 enables, 0 masks.
*SRE mask number
Parameter
mask_number decimal or
non-decimal
numeric
mask_number <newline><^END>
mask_number is decimal numeric value that is the sum of the binary-weighted
values for each bits. Response data type is NR1.
The Service Request "Enable" Register determines which bits of the Status Byte
Register are enabled. Enabled bits are ORed together, and the result is reported to
the Master Summary Status.
The Service Request "Enable" Register consists of 8 bits: Bit0 to Bit7. Bit6 is not
defined, and is always 0.
Refer to Chapter 3 for details about the Service Request "Enable" Register.
You can send a mask_number parameter in decimal numeric or non-decimal
numeric type.
The following table shows the bits of the Status Byte Register.
binary-
bit
weight
0 1 EMERgency Status
1 2 Measurement/Stress Status
2 4 NOT USED
3 8 QUEStionable Status
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Type
numeric value that is the sum of the
binary-weighted values for the desired
bits
description
Common Commands
*SRE
Explanation
4-13