Hcopy:item:annotation2:State - Agilent Technologies 4155C Command Reference Manual

Example
Syntax
Parameter
Query response
Example
OUTPUT @Hp4155;":HCOP:ITEM:ANN:STAT ON"
OUTPUT @Hp4155;":HCOP:ITEM:ANN:STAT?"
ENTER @Hp4155;A

:HCOPy:ITEM:ANNotation2:STATe

This command sets whether the user defined comment for each page group (USER
COMMENT) should be plotted or printed when the :HCOPy:IMMediate command
or :HCOPy:DATA? query is sent.
At *RST, the value of this parameter is ON.
:HCOPy:ITEM:ANNotation2:STATe OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":HCOP:ITEM:ANN2:STAT ON"
OUTPUT @Hp4155;":HCOP:ITEM:ANN2:STAT?"
ENTER @Hp4155;A
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:HCOPy:ITEM:ANNotation2:STATe
Explanation
USER COMMENT is not plotted or printed.
USER COMMENT is plotted or printed.
SCPI Commands
5-43