Page:channels[:Cdefinition]:Default; Page:channels[:Cdefinition]:Gndu:disable; Page:channels[:Cdefinition]:Gndu:mode - Agilent Technologies 4155C Command Reference Manual

Syntax
Example
Syntax
Example
Syntax
Query response
Example
SCPI Commands

:PAGE:CHANnels[:CDEFinition]:DEFault

:PAGE:CHANnels[:CDEFinition]:DEFault
This command sets the measurement and stress setup to the same state as after *RST
is executed.
This command does not affect the setup parameters of SYSTEM page group except
the following:
PRINT SETUP all settings
COLOR SETUP PLOTTER PEN NO.
MISCELLANEOUS COMMAND SET
This command does not have query form.
:PAGE:CHANnels [ :CDEFinition] :DEFault
OUTPUT @Hp4155;":PAGE:CHAN:DEF"

:PAGE:CHANnels[:CDEFinition]:GNDU:DISable

This command deletes the settings of GNDU.
This command does not have query form.
:PAGE:CHANnels [ :CDEFinition] :GNDU:DISable
OUTPUT @Hp4155;":PAGE:CHAN:GNDU:DIS"

:PAGE:CHANnels[:CDEFinition]:GNDU:MODE?

This command returns the output MODE of GNDU.
This command has query form only.
:PAGE:CHANnels [ :CDEFinition] :GNDU:MODE?
COMM | DIS <newline><^END>
When the GNDU is not used, the response data may be DIS(DISable).
OUTPUT @Hp4155;":PAGE:CHAN:GNDU:MODE?"
ENTER @Hp4155;A$
5-84 Agilent 4155C/4156C SCPI Command Reference, Edition 1