Agilent Technologies 4395A Service Manual
  1. Manuals
  2. Brands
  3. Agilent Technologies Manuals
  4. Measuring Instruments
  5. 4395A
  6. Service manual
Agilent Technologies 4395A Service Manual

Agilent Technologies 4395A Service Manual

Network/spectrum/impedance analyzer
Hide thumbs Also See for 4395A:
Table of Contents

Advertisement

Quick Links

See also: Programming Manual

Service Manual

SERIAL NUMBERS
Agilent Part No. 04395-90120
Printed in Japan
August 2002
Fifth Edition

Advertisement

Table of Contents
loading

Related Manuals for Agilent Technologies 4395A

Summary of Contents for Agilent Technologies 4395A

  • Page 1: Service Manual

    Service Manual SERIAL NUMBERS Agilent Part No. 04395-90120 Printed in Japan August 2002 Fifth Edition...
  • Page 3 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 4 WARNINGS The Agilent Technologies Company assumes no liability for the customer's failure to comply with these requirements. Note Note Ground The Instrument DO NOT Operate In An Explosive Atmosphere Keep Away From Live Circuits DO NOT Service Or Adjust Alone...

  • Page 5: Do Not Substitute Parts Or Modify Instrument

    DO NOT Substitute Parts Or Modify Instrument Dangerous Procedure Warnings Warning Dangerous voltages, capable of causing death, are present in this instrument. Use extreme caution when handling, testing, and adjusting this instrument.
  • Page 6 General Information No other warranty is expressed or implied. Agilent Technologies speci cally disclaims the implied warranties of merchantability and tness for a particular purpose.
  • Page 7 The remedies provided herein are buyer's sole and exclusive remedies. Agilent Technologies shall not be liable for any direct, indirect, special, incidental, or consequential damages, whether based on contract, tort, or any other legal theory.
  • Page 8 Italics copy lename copy file1 Computer HARDKEYS NNNNNNNNNNNNNNNNNNNNNNNNNN NNNNN SOFTKEYS viii...
  • Page 9 Operation Manual (Agilent Part Number 04395-90020) Programming Manual (Agilent Part Number 04395-90021) HP Instrument BASIC Users Handbook (Agilent Part Number E2083-90005) HP Instrument BASIC Programming Techniques HP Instrument BASIC Interface Techniques HP Instrument BASIC Language Reference Service Manual (Option 0BW only), (Agilent Part Number 04395-90120)
  • Page 11 Contents Contents-1...
  • Page 12 Contents-2...
  • Page 13 > > Contents-3...
  • Page 14 < < < < Contents-4...
  • Page 15 < < Contents-5...
  • Page 16 Contents-6...
  • Page 17 Contents-7...
  • Page 18 Ch 1 Ch 2 Contents-8...
  • Page 19 Contents-9...
  • Page 20 Figures Contents-10...
  • Page 21 < Contents-11...
  • Page 22 Contents-12...
  • Page 23 Tables Contents-13...
  • Page 24 Contents-14...
  • Page 25 Contents-15...

  • Page 27: General Information

    General Information Service Manual Perfomance Test Calculation Sheet Performance Test Record Adjustments Note Troubleshooting. Power Supply Troubleshooting Digital Control Troubleshooting Accessories Troubleshooting Accessories Troubleshooting Accessories Troubleshooting General Information...

  • Page 28: Replaceable Parts

    Note Replaceable Parts Post-Repair Procedures Appendices Messages General Information...

  • Page 29: Operation

    Operation Manual Table 1-1. Performance Tests Test Number Test Name Category : NA: Network Analyzer Mode, SA: Spectrum Analyzer Mode Adjustments Troubleshooting Note General Information...

  • Page 30: How To Use

    Calculation Sheet Performance Test Record How to Use General Information...
  • Page 31 Table 1-2. Recommended Test Equipment Equipment Critical Speci cations Recommended Model/ Agilent Part Number Frequency Counter Frequency Range: 500 MHz,Time Base Error: 5334B 10 /year Frequency Standard Frequency: 10 MHz,Time Base Error: 5061B /year Spectrum Analyzer Frequency Range: 100 Hz to 1.5 GHz 8566A/B Network Analyzer Frequency Range: 300 kHz to 500 MHz...
  • Page 32 Table 1-2. Recommended Test Equipment (continued) Equipment Critical Speci cations Recommended Model/ Agilent Part Number 6 dB Fixed Attenuation 50 , N(m)-N(f) 8491A Opt. 006 6 dB Fixed Attenuation 50 , N(m)-N(f), VSWR 1.015 8491A Opt. 006 & Opt. H60 10 dB Fixed Attenuation 50 , N(m)-N(f), VSWR 1.015 8491A Opt.
  • Page 33 Table 1-3. Calibration Data Required for 8496G Opt. 001 and H60 Frequency Attenuation Uncertainty Note General Information...

  • Page 35: Performance Tests

    Performance Tests Note Note CALCULATION SHEET AND PERFORMANCE TEST RECORD Performance Tests...

  • Page 36: Specification

    Description Specification : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : <  : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : <...

  • Page 37: Analyzer Type

    Figure 2-1. Frequency Accuracy Test Setup Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE NETWORK ANALYZER Center Span NNNNNNNNNNNNNNNNNNNNNNNNNNNNN ZERO SPAN Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Performance Tests...
  • Page 38 Description Specification : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : < : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Test Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 39 Figure 2-2. Source Level Accuracy Test Setup Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE NETWORK ANALYZER Center Span NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ZERO SPAN Center Performance Tests...

  • Page 40: Center Frequency

    Table 2-1. Source Level Flatness Test Settings 1 4395A Center Frequency Figure 2-3. Source Level Flatness Test Setup Performance Tests...
  • Page 41 Center Table 2-2. Source Level Flatness Test Settings 2 4395A Center Frequency Performance Tests...
  • Page 42 Description Specification Output Power Linearity 40 dBm power 1.0 dB < power 40 dBm 1.5 dB : @23 C, relative to 0 dBm output Test Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 43 Figure 2-4. Non-sweep Power Linearity Test Setup Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE NETWORK ANALYZER Center Span NNNNNNNNNNNNNNNNNNNNNNNNNNNNN ZERO SPAN Table 2-3. Non-Sweep Power Linearity Test Settings 4395A Step Attenuator Source Power Performance Tests...
  • Page 44 2-10 Performance Tests...
  • Page 45 Description Specification : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Test Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 46 Trigger NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNN TRIGGER[xxx] MANUAL Trigger NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN TRIGGER[xxx] TRIG EVENT [ON SWEEP] NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN TRIGGER [ON POINT] Trigger NNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNN SINGLE TRIGGER:[MANUAL] MANUAL Table 2-4. Power Sweep Linearity Test Settings 1 4395A Step Attenuator Source Power 2-12 Performance Tests...
  • Page 47 NNNNNNNNNNNNNNNNNNNN TRIGGER[xxx] MANUAL Trigger NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN TRIGGER[xxx] TRIG EVENT [ON SWEEP] NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN TRIGGER [ON POINT] Trigger NNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNN SINGLE TRIGGER:[MANUAL] MANUAL Table 2-5. Power Sweep Linearity Test Settings 2 4395A Step Attenuator Source Power NNNNNNNNNNNNNNNNNNNN MANUAL Performance Tests 2-13...
  • Page 48 2-14 Performance Tests...

  • Page 49: Test Equipment

    Description Specification : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :< : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :<...
  • Page 50 NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE NETWORK ANALYZER Span NNNNNNNNNNNNNNNNNNNNNNNNNNNNN ZERO SPAN Source NNNNNNNNNNNNNNNNN POWER Center Table 2-6. Harmonics Test Settings 4395A Spectrum Analyzer Center Frequency 2nd Harmonics 3rd Harmonics Frequency RBW Frequency Frequency Span SINGLE PEAK SEARCH SINGLE PEAK SEARCH 2-16...
  • Page 51 SINGLE PEAK SEARCH Center Table 2-7. Non-Harmonics Test Settings 4395A Spectrum Analyzer Center Frequency Non-Harmonics Spurious Frequency RBW Frequency Span SINGLE PEAK SEARCH SINGLE PEAK SEARCH Performance Tests 2-17...
  • Page 52 Description Specification  : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 1: Current at DC source connector 2: Voltage at DC source connector...
  • Page 53 Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE NETWORK ANALYZER Table 2-8. DC Bias Level Test Settings 4395A 4395A Multimeter Range DC Level DC Current Limit (Auto Range) Performance Tests 2-19...
  • Page 54 Figure 2-8. DC Bias Current Level Test Setup Table 2-9. DC Bias Current Level Test Settings 4395A 4395A Multimeter Range DC Level DC Voltage Limit (Auto Range) 2-20 Performance Tests...
  • Page 55 Description Specification Noise Level Frequency @IFBW=10 Hz < < freq. 100 kHz 85 dBm < 100 kHz freq. [ 115 + /100 ] dBm is measurement frequency (MHz). Test Equipment : : : : : : : : : : : : : : : : : : : : : : : : Procedure Figure 2-9.
  • Page 56 Span NNNNNNNNNNNNNNNNNNNNNNNNNNNNN ZERO SPAN Bw/Avg NNNNNNNNNNNNNNNNN IF BW Sweep NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NUMBER of POINTS Utility NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN STATISTICS on OFF NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN STATISTICS ON off Center Table 2-10. Receiver Noise Test Settings 4395A Center Frequency Meas NNNNN Trigger NNNNNNNNNNNNNNNNNNNN SINGLE 2-22 Performance Tests...
  • Page 57 Meas NNNNN Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Meas NNNNN Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Performance Tests 2-23...
  • Page 58 Description Specification < : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : < : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : <...

  • Page 59: Reference Value

    Ch 1 Meas NNNNNNNNNNN Format NNNNNNNNNNNNNNNNNNNNNNN LOG MAG Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REFERENCE VALUE Ch 2 Meas NNNNNNNNNNN Format NNNNNNNNNNNNNNNNNNNNNNN LOG MAG Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REFERENCE VALUE Source NNNNNNNNNNNNNNNNN POWER Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN R Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN A...
  • Page 60 Sweep NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN COUPLED CH ON off 2-26 Performance Tests...
  • Page 61 Description Specification Return Loss Frequency @att.=10 dB 100 kHz freq. 100 MHz 25 dB < 100 MHz freq. 15 dB Test Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...

  • Page 62: Calibration Menu

    Figure 2-11. Impedance Test Setup Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE NETWORK ANALYZER Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN R Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN A Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN B Preset Start Stop Menu NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN...
  • Page 63 NNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SHORTS SHORT (M) DONE:SHORTS NNNNNNNNNNNNNN LOAD NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DONE:1-PORT CAL MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNN TRIGGER MENU SINGLE MKR FCTN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNN MKR SEARCH [OFF] MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNN TRIGGER MENU SINGLE MKR FCTN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNN MKR SEARCH [OFF] MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNN TRIGGER MENU SINGLE...
  • Page 64 NNNNNNNNNNNNNN LOAD NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DONE:1-PORT CAL MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNN TRIGGER MENU SINGLE MKR FCTN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNN MKR SEARCH [OFF] MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNN TRIGGER MENU SINGLE MKR FCTN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNN MKR SEARCH [OFF] MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNN TRIGGER MENU SINGLE MKR FCTN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNN MKR SEARCH [OFF] 2-30...
  • Page 65 Description Specification : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : < Test Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 66 Figure 2-12. Absolute Amplitude Accuracy Test Setup 1 Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE NETWORK ANALYZER Source NNNNNNNNNNNNNNNNN POWER Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN R Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN A Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN B Sweep NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN...

  • Page 67: Center Frequency

    Meas NNNNN Center Bw/Avg NNNNNNNNNNNNNNNNN IF BW Table 2-12. Absolute Amplitude Accuracy Test Settings 1 4395A IF BW Center Frequency Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Meas NNNNN Meas NNNNN Performance Tests 2-33...
  • Page 68 Figure 2-13. Absolute Amplitude Accuracy Test Setup 2 Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE NETWORK ANALYZER Source NNNNNNNNNNNNNNNNN POWER Bw/Avg NNNNNNNNNNNNNNNNN IF BW Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN R Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN A Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU...
  • Page 69 Center Table 2-13. Absolute Amplitude Accuracy Test Settings 2 4395A Center Frequency Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Meas NNNNN Meas NNNNN Performance Tests 2-35...
  • Page 70 Description Specification Input Level Magnitude Ratio Dynamic Phase Dynamic Accuracy (relative to full scale input level 10 dB) Accuracy > <6 <6 0 dB Input Level 10dB 0.4 dB 3 deg <6 <6 10 dB Input Level 60 dB 0.05 dB 0.3 deg >...

  • Page 71: Network Analyzer

    Procedure Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE NETWORK ANALYZER Display NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DUAL CHAN on OFF NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DUAL CHAN ON off Marker NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MKR [CONT] NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MKR [DISCRETE] Start Stop Bw/Avg NNNNNNNNNNNNNNNNN IF BW Sweep NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NUMBER of POINTS Figure 2-14. A/R Magnitude Ratio/Phase Dynamic Accuracy Test Setup 1 Performance Tests 2-37...

  • Page 72: Calibrate Menu

    AVERAGING on OFF NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN AVERAGING ON off NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN CALIBRATE MENU RESPONSE THRU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DONE:RESPONSE Table 2-14. A/R Dynamic Accuracy Test Settings 1 4395A Step Attenuator 4395A Input Level Source Power Source NNNNNNNNNNNNNNNNN POWER Trigger NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NUMBER OF GROUPS Marker...
  • Page 73 Figure 2-15. A/R Magnitude Ratio/Phase Dynamic Accuracy Test Setup 2 Source NNNNNNNNNNNNNNNNN POWER Ch 1 Bw/Avg NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN AVERAGING FACTOR Ch 2 Bw/Avg NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN AVERAGING FACTOR Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN R Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN A NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN...

  • Page 74: Input Level

    Table 2-15. A/R Dynamic Accuracy Test Settings 2 4395A Step Attenuator Input Level Trigger NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NUMBER OF GROUPS Marker 2-40 Performance Tests...
  • Page 75 Figure 2-16. B/R Magnitude Ratio/Phase Dynamic Accuracy Test Setup 1 Source NNNNNNNNNNNNNNNNN POWER Ch 1 Meas NNNNNNNNNNN Format NNNNNNNNNNNNNNNNNNNNNNN LOG MAG Bw/Avg NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN AVERAGING FACTOR Bw/Avg NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN AVERAGING on OFF NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN AVERAGING ON off Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN R Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN...
  • Page 76 NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN CALIBRATE MENU RESPONSE THRU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DONE:RESPONSE Table 2-16. B/R Dynamic Accuracy Test Settings 1 4395A Step Attenuator 4395A Input Level Source Power Source NNNNNNNNNNNNNNNNN POWER Trigger NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NUMBER OF GROUPS Marker 2-42 Performance Tests...
  • Page 77 Figure 2-17. B/R Magnitude Ratio/Phase Dynamic Accuracy Test Setup 2 Performance Tests 2-43...
  • Page 78 ATTEN R Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN B NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN CALIBRATE MENU RESPONSE THRU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DONE:RESPONSE Table 2-17. B/R Dynamic Accuracy Test Settings 2 4395A Step Attenuator Input Level Trigger NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NUMBER OF GROUPS Marker 2-44 Performance Tests...
  • Page 79 Description Specification : : < : : : < Test Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Procedure...
  • Page 80 Figure 2-18. A/R Magnitude Ratio/Phase Frequency Response Test Setup Ch 1 Meas NNNNNNNNNNN Format NNNNNNNNNNNNNNNNNNNNNNN LOG MAG Ch 2 Meas NNNNNNNNNNN Format NNNNNNNNNNNNNNNNN PHASE Start Stop Sweep NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NUMBER of POINTS Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Ch 1 Display NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DATA MEMORY Ch 2 Display NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN...
  • Page 81 Ch 1 Display NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN DATA MATH [xxx] DATA+MEM GAIN Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN AUTO SCALE Ch 2 Display NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN DATA MATH [xxx] DATA+MEM GAIN Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN AUTO SCALE Ch 1 Search Search NNNNNNNNNNN NNNNNNNNNNN Ch 2 Marker NNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN...
  • Page 82 Figure 2-19. B/R Magnitude Ratio/Phase Frequency Response Test Setup Ch 1 Meas NNNNNNNNNNN Format NNNNNNNNNNNNNNNNNNNNNNN LOG MAG Ch 2 Meas NNNNNNNNNNN Format NNNNNNNNNNNNNNNNN PHASE Start Stop Sweep NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NUMBER of POINTS Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Ch 1 Display NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DATA MEMORY Ch 2 Display NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN...
  • Page 83 Ch 1 Display NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN DATA MATH [xxx] DATA+MEM GAIN Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN AUTO SCALE Ch 2 Display NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN DATA MATH [xxx] DATA+MEM GAIN Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN AUTO SCALE Ch 1 Search Search NNNNNNNNNNN NNNNNNNNNNN Ch 2 Marker NNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN...

  • Page 84: Test Equipment

    Description Specification : : : : : : : : : : : : : : : : : : : : : : : < : : : : : : : : : : : : : : : : : : : : : < : : : : : : : : : : : <...

  • Page 85: Spectrum Analyzer

    STATISTICS on OFF NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN STATISTICS ON off Meas NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNN DETECTION[xxx] SAMPLE Meas NNNNN Center Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Span Table 2-18. Displayed Average Noise Level Test Settings 4395A Center Frequency RBW Frequency Span Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Meas NNNNN Performance Tests 2-51...
  • Page 86 Meas NNNNN 2-52 Performance Tests...
  • Page 87 Description Magnitude Ratio/Phase Dynamic Accuracy Test Specification Range Amplitude Fidelity (relative to full scale input level) > 0 dB range 30 dB 0.05 dB > 30 dB range 40 dB 0.07 dB > 40 dB range 50 dB 0.15 dB >...
  • Page 88 1: Calibration values for attenuation settings of 10 dB to 60 dB at 50 MHz are required. Procedure Note Figure 2-21. Amplitude Fidelity Test Setup 1 Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE SPECTRUM ANALYZER Center Span Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Bw/Avg NNNNNNNNNNNNNNNNNNNNNNNNNN VIDEO BW...
  • Page 89 Scale Ref Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REFERENCE VALUE ATTENUATOR MENU NNNNNNNNNNNNNNNNNNNNNNN ATTEN R Search NNNNNNNNNNN Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Search Marker NNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN 1MODE MENU FIXED 1MKR Table 2-19. Amplitude Fidelity Test Settings dB from Step Attenuator Reference Input Level Trigger NNNNNNNNNNNNNNNNNNNN SINGLE...
  • Page 90 Scale Ref Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REFERENCE VALUE ATTENUATOR MENU NNNNNNNNNNNNNNNNNNNNNNN ATTEN B Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE SPECTRUM ANALYZER Center Span Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Bw/Avg NNNNNNNNNNNNNNNNNNNNNNNNNN VIDEO BW Meas NNNNN Scale Ref Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNN REFERENCE VALUE ATTENUATOR MENU ATT R...
  • Page 91 Meas NNNNN Scale Ref Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNN REFERENCE VALUE ATTENUATOR MENU ATT B Performance Tests 2-57...
  • Page 92 Description Specification : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : < : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : <...
  • Page 93 Figure 2-22. Input Attenuator Accuracy Test Setup Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE SPECTRUM ANALYZER Center Span Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNN SCALE/DIV Meas NNNNN Scale Ref Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REFERENCE VALUE ATTENUATOR MENU NNNNNNNNNNNNNNNNNNNNNNN ATTEN R Trigger NNNNNNNNNNNNNNNNNNNN SINGLE...
  • Page 94 Table 2-20. Input Attenuator Switching Uncertainty Test Settings 4395A Step Attenuator Input Attenuator Reference Level Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Search NNNNNNNNNNN Meas NNNNN Scale Ref Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REFERENCE VALUE ATTENUATOR MENU NNNNNNNNNNNNNNNNNNNNNNN ATTEN A Meas NNNNN Scale Ref Scale Ref...
  • Page 95 Description Specification O set from Carrier Noise Sidebands < 1 kHz 97 dBc/Hz < 100 kHz 110 dBc/Hz Test Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Procedure...
  • Page 96 Figure 2-23. Noise Sidebands Test Setup Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE SPECTRUM ANALYZER Meas NNNNN Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REFERENCE VALUE Utility NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NOISE FORM on OFF NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NOISE FORM ON off Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN auto MAN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ATTEN AUTO man 2-62...
  • Page 97 Table 2-21. Noise Sideband Test Settings Signal Generator 4395A O set Carrier Frequency from Carrier Center RBW VBW Frequency Span Frequency Center Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Bw/Avg NNNNNNNNNNNNNNNNNNNNNNNNNN VIDEO BW Span Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Search Marker NNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN 1MODE MENU...
  • Page 98 4 5 4 Bw/Avg NNNNNNNNNNNNNNNNNNNNNNNNNN VIDEO BW Span Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Search Marker NNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN 1MODE MENU 1MKR 4 5 4 Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Bw/Avg NNNNNNNNNNNNNNNNNNNNNNNNNN VIDEO BW Span Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Search Marker NNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN 1MODE MENU 1MKR 4 5 4 Center...
  • Page 99 Description < Specification : : : : : : : : : : : : : : : : : : : : : : : < : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : < <...
  • Page 100 Note Figure 2-24. Frequency Response Test Setup 1 Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE SPECTRUM ANALYZER Span Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REFERENCE VALUE Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNN SCALE/DIV Meas NNNNN Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN R Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW 2-66 Performance Tests...
  • Page 101 Table 2-22. Frequency Response Test Settings 1 Signal Generator 4395A Frequency Center Frequency RBW Center Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Search NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SEARCH: PEAK Performance Tests 2-67...
  • Page 102 Figure 2-25. Frequency Response Test Setup 2 Meas NNNNN Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN A Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Meas NNNNN Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN B Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW 2-68 Performance Tests...
  • Page 103 Figure 2-26. Frequency Response Test Setup 3 < Performance Tests 2-69...
  • Page 104 Table 2-23. Frequency Response Test Settings 2 Function Generator 4395A Frequency Center Frequency Frequency Span RBW Center Span Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW < Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Search NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SEARCH: PEAK < Meas NNNNN Meas NNNNN 2-70 Performance Tests...

  • Page 105: Specification

    Description Specification : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : < 1: single tone input with full scale input 10 dB Test Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 106 Figure 2-27. Second Harmonics Distortion Test Setup Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE SPECTRUM ANALYZER Meas NNNNN Center Span Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REFERENCE VALUE Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN R Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Search Marker NNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN...
  • Page 107 Description Specification : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : < 1: two tones input with full scall input level 16 dB, Test Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 108 Figure 2-28. Third Order Intermodulation Distortion Test Setup Meas Preset NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE SPECTRUM ANALYZER Meas NNNNN Center Span Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Bw/Avg NNNNNNNNNNNNNNNNNNNNNNNNNN VIDEO BW Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REFERENCE VALUE Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN R 2-74 Performance Tests...
  • Page 109 Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Marker Marker NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN 1MODE MENU FIXED 1MKR Marker Marker Marker NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNN 1MODE MENU 1MODE OFF Performance Tests 2-75...
  • Page 110 Description Specification : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :< 1: single tone input with full scale input 10 dB, RBW 100 kHz, 1 kH freq.
  • Page 111 Figure 2-29. Other Spurious Test Setup Meas Preset Meas NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNN ANALYZER TYPE SPECTRUM ANALYZER Table 2-24. Other Spurious Test Settings Signal Generator 4395A Frequency Center Frequency RBW VBW Spurious Reference Frequency Span Frequency Value Performance Tests 2-77...
  • Page 112 Center Span Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Search Marker NNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN 1MODE MENU FIXED 1MKR Center Span Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Bw/Avg NNNNNNNNNNNNNNNNNNNNNNNNNN VIDEO BW Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Marker NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN 1MODE MENU 1MKR SWP PARAM Marker 2-78 Performance Tests...
  • Page 113 Description Specification : : : : : : : : : : : : : < Test Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Procedure Figure 2-30.
  • Page 114 ANALYZER TYPE SPECTRUM ANALYZER Meas NNNNN Span Bw/Avg NNNNNNNNNNNNNNNNNNNN RES BW Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REFERENCE VALUE Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN ATTENUATOR MENU ATTEN R Table 2-25. Residual Response Test Settings 4395A Center Frequency Trigger NNNNNNNNNNNNNNNNNNNN SINGLE Search NNNNNNNNNNN 2-80 Performance Tests...
  • Page 115 Calculation Sheet Level Accuracy Frequency Power Meter Reading [ref : is the power meter reading of the source level accuracy test. Calculation Sheet...
  • Page 116 Level Flatness Frequency Power Meter Reading Test Result [a ref ] Calculation Sheet...
  • Page 117 Calibration Value a1 = a2 = a3 = a4 = a5 = : Incremental attenuation referenced to 0 dB setting. Reference (0 dBm) 4395A Power Meter Reading Reference Source Power [ref ] b+a3 = Non-Sweep Power Linearity 4395A Power Meter Reading...
  • Page 118 4395A Power Meter Reading Source Power a1 = a2 = a3 = a4 = a5 = b1 = b2 = b3 = b4 = b5 = Stop Power Source Power Test Result a4 (a5 5) = a3 (a5 10) =...
  • Page 119 DC Bias Voltage Level Accuracy 4395A Multimeter Reading Test Result DC Voltage a+40 = a+10 = a+4 = a+0 = a 4 = a 10 = a 40 = DC Bias Current Level Accuracy 4395A Multimeter Reading Test Result DC Current...

  • Page 120: Frequency Input

    Frequency Input Trace Mean Test Result [ 20 log(a) ] Calculation Sheet...
  • Page 121 > 10 Hz Freq. 1 kHz Measurement Marker Reading Test Result a 10 a 10 > 1 kHz Freq. 100 kHz Measurement Marker Reading Test Result a 10 a 10 100 kHz Freq. 500 kHz Measurement Marker Reading Test Result a 10 a 10 Calculation Sheet...
  • Page 122 Input R Frequency 4395A Reading Meter Reading Test Result [a b] Calculation Sheet...
  • Page 123 Input A Frequency 4395A Reading Meter Reading Test Result [a b] Calculation Sheet...
  • Page 124 Input B Frequency 4395A Reading Meter Reading Test Result [a b] 3-10 Calculation Sheet...
  • Page 125 = a7 = a8 = a9 = a10 = : Incremental attenuation referenced to 0 dB setting. A/R Measurement Input Level 4395A Reading Test Result b a1 = b+a2-a1 = b+a3-a1 = b+a4-a1 = b+a5-a1 = b+a6-a1 = b+a7-a1 =...
  • Page 126 Input R Center Trace Mean Test Result Frequency log(a/0.001) 4.8dB log(a/0.001) 10dB log(a/0.001) 10dB log(a/0.001) 30dB log(a/0.001) 30dB log(a/0.001) 30dB log(a/0.001) 30dB log(a/0.001) 30dB log(a/0.001) 30dB : 10 LOG(RBW 3 Hz /RBW 1 Hz) : 10 LOG(RBW 10 Hz /RBW 1 Hz) : 10 LOG(RBW 1 kHz /RBW 1 Hz) Input A...
  • Page 127 Input B Center Trace Mean Test Result Frequency log(a/0.001) 4.8dB log(a/0.001) 10dB log(a/0.001) 10dB log(a/0.001) 30dB log(a/0.001) 30dB log(a/0.001) 30dB log(a/0.001) 30dB log(a/0.001) 30dB log(a/0.001) 30dB : 10 LOG(RBW 3 Hz /RBW 1 Hz) : 10 LOG(RBW 10 Hz /RBW 1 Hz) : 10 LOG(RBW 1 kHz /RBW 1 Hz) Calculation Sheet...
  • Page 128 = a6 = a7 = a8 = : Incremental attenuation referenced to 0 dB setting. Amplitude Fidelity Input R dB from 4395A Reading Test Result Reference Input Level b+a2-a1 = b+a3-a1 = b+a4-a1 = b+a5-a1 = b+a6-a1 = b+a7-a1 =...
  • Page 129 Input B dB from 4395A Reading Test Result Reference Input Level b+a2-a1 = b+a3-a1 = b+a4-a1 = b+a5-a1 = b+a6-a1 = b+a7-a1 = b+a8-a1 = Input R dB from 4395A Reading Test Result Reference Input Level b+a1-a2 = Input A...
  • Page 130 = a5 = : Incremental attenuation referenced to 0 dB setting. Input Attenuator Switching Uncertainty Input R 4395A 4395A Reading Test Result Input Attenuation b a4+a5 = b a4+a3 = b a4+a2 = b a4+a1 = b a4 =...

  • Page 131: Input Attenuation

    Input B 4395A 4395A Reading Test Result Input Attenuation b a4+a5 = b a4+a3 = b a4+a2 = b a4+a1 = b a4 = Calculation Sheet 3-17...
  • Page 132 Note Input R Reference at 50 MHz 4395A 4395A Power Meter 4395A Power Meter Test Result Frequency Reading 1 Reading 1 Reading 2 Reading 2 [ref ] [r1] [r2] [r3] [r4] [(r1 r2+r3 r4)/2] 3-18 Calculation Sheet...
  • Page 133 At Frequencies 1 MHz 4395A 4395A Power Meter 4395A Power Meter Test Result Frequency Reading 1 Reading 1 Reading 2 Reading 2 [a1] [b1] [a2] [b2] [(a1 b1+a2 b2)/2 ref ] Calculation Sheet 3-19...
  • Page 134 < At Frequencies 1 MHz Frequency 4395A Reading Test Result [c+20 dBm ref ] : is ( 20 dBm). 20 dBm is the output level of the function generator. Input A Reference at 50 MHz 4395A 4395A Power Meter 4395A...
  • Page 135 At Frequencies 1 MHz 4395A 4395A Power Meter 4395A Power Meter Test Result Frequency Reading 1 Reading 1 Reading 2 Reading 2 [a1] [b1] [a2] [b2] [(a1 b1+a2 b2)/2 ref ] Calculation Sheet 3-21...
  • Page 136 < At Frequencies 1 MHz Frequency 4395A Reading Test Result [c+20 dBm ref ] : is ( 20 dBm). 20 dBm is the output level of the function generator. Input B Reference at 50 MHz 4395A 4395A Power Meter 4395A...
  • Page 137 At Frequencies 1 MHz 4395A 4395A Power Meter 4395A Power Meter Test Result Frequency Reading 1 Reading 1 Reading 2 Reading 2 [a1] [b1] [a2] [b2] [(a1 b1+a2 b2)/2 ref ] Calculation Sheet 3-23...
  • Page 138 4395A Reading Test Result [c+20 dBm ref ] : is ( 20 dBm). 20 dBm is the output level of the function generator. Frequency 4395A Marker Reading Test Result Lower Frequency Upper Frequency [larger of a and b] 3-24 Calculation Sheet...

  • Page 139: Performance Test Record

    Performance Test Record without Option 1D5 Frequency Minimum Test Result Maximum Measurement Limit Limit Uncertainty with Option 1D5 Frequency Minimum Test Result Maximum Measurement Limit Limit Uncertainty Performance Test Record...
  • Page 140 Level Accuracy Minimum Limit Test Result Maximum Limit Measurement Uncertainty Level Flatness Frequency Minimum Test Result Maximum Measurement Limit Limit Uncertainty Performance Test Record...
  • Page 141 Power Setting Minimum Test Result Maximum Measurement Limit Limit Uncertainty STOP Power Source Minimum Test Result Maximum Measurement Power Limit Limit Uncertainty Performance Test Record...
  • Page 142 Harmonics Frequency Harmonics Test Result Test Limit Measurement Frequency Uncertainty < < < < < < < < < < < < Non-Harmonic Spurious Frequency Non-Harmonic Test Result Test Limit Measurement Frequency Uncertainty < < < < < Performance Test Record...
  • Page 143 DC Bias Test Result Test Measurement Limit Uncertainty < < < < < < < DC Bias Test Result Test Measurement Limit Uncertainty < < < < < < < < Performance Test Record...
  • Page 144 Frequency Input Test Result Test Limit < < < < < < < < < < < < < < < < < < < < < < < < Performance Test Record...
  • Page 145 < 10 Hz Freq. 1 kHz Measurement Test Result Test Limit < < < 1 kHz Freq. 100 kHz Measurement Test Result Test Limit < < 100 kHz Freq. 500 MHz Measurement Test Result Test Limit < < 100 kHz Freq.
  • Page 146 Input R Frequency Mimimum Test Result Maximum Measurement Limit Limit Uncertainty Performance Test Record...
  • Page 147 Input A Frequency Mimimum Test Result Maximum Measurement Limit Limit Uncertainty Performance Test Record...
  • Page 148 Input B Frequency Mimimum Test Result Maximum Measurement Limit Limit Uncertainty 4-10 Performance Test Record...

  • Page 149: Measurement Uncertainty

    A/R Measurement Input Measurement Minimum Test Result Maximum Measurement Level Limit Limit Uncertainty Relative to full scale input level Performance Test Record 4-11...
  • Page 150 B/R Measurement Input Measurement Minimum Test Result Maximum Measurement Level Limit Limit Uncertainty Relative to full scale input level 4-12 Performance Test Record...
  • Page 151 A/R Measurement Measurement Minimum Test Result Maximum Limit Limit B/R Measurement Measurement Minimum Test Result Maximum Limit Limit Input R Frequency Test Result Test Limit < < < < < < < < < Performance Test Record 4-13...
  • Page 152 Input A Frequency Test Result Test Limit < < < < < < < < < Input B Frequency Test Result Test Limit < < < < < < < < < 4-14 Performance Test Record...
  • Page 153 Input R dB from Minimum Limit Test Result Maximum Limit Measurement Reference Input Level Uncertainty Input A dB from Minimum Limit Test Result Maximum Limit Measurement Reference Input Level Uncertainty Input B dB from Minimum Limit Test Result Maximum Limit Measurement Reference Input Level Uncertainty Performance Test Record...
  • Page 154 Input R Input Minimum Limit Test Result Maximum Limit Measurement Attenuation Uncertainty Input A Input Minimum Limit Test Result Maximum Limit Measurement Attenuation Uncertainty Input B Input Minimum Limit Test Result Maximum Limit Measurement Attenuation Uncertainty 4-16 Performance Test Record...
  • Page 155 Input R Frequency O set Test Result Test Limit Measurement from Carrier Uncertainty < < < < < < < < < < < < < < < < < < < < < < < < Performance Test Record 4-17...
  • Page 156 Input R Level Accuracy Minimum Limit Test Result Maximum Limit Measurement Uncertainty Frequency Response Frequency Minimum Limit Test Result Test Limit Measurement Uncertainty 4-18 Performance Test Record...
  • Page 157 Frequency Minimum Limit Test Result Test Limit Measurement Uncertainty Input A Level Accuracy Minimum Limit Test Result Maximum Limit Measurement Uncertainty Performance Test Record 4-19...
  • Page 158 Frequency Response Frequency Minimum Limit Test Result Test Limit Measurement Uncertainty 4-20 Performance Test Record...
  • Page 159 Frequency Minimum Limit Test Result Test Limit Measurement Uncertainty Input B Level Accuracy Minimum Limit Test Result Maximum Limit Measurement Uncertainty Performance Test Record 4-21...
  • Page 160 Frequency Response Frequency Minimum Limit Test Result Test Limit Measurement Uncertainty 4-22 Performance Test Record...
  • Page 161 Frequency Minimum Limit Test Result Test Limit Measurement Uncertainty Frequency Test Result Test Limit Measurement Uncertainty < Frequency Test Result Test Limit Measurement Uncertainty < Performance Test Record 4-23...
  • Page 162 Input Spurious Test Result Test Limit Measurement Frequency Frequency Uncertainty < < < < < < < < < < < < Frequency Test Result Test Limit < < < < < < < < < < < < < <...
  • Page 163 Adjustments Note Warning Any interruption of the protective ground conductor (inside or outside the instrument) or disconnection of the protective ground terminal can make the instrument dangerous. Intentional interruption of the protective ground system for any reason is prohibited. Warning The adjustments described in this chapter are performed with power applied and the protective covers removed.
  • Page 164 Windows NT PC (Personal Computer) Adjustments...
  • Page 165 Table 5-1. Required Test Equipment for Adjustments Equipment Critical Speci cations Model Multimeter No substitute 3458A Frequency Counter Frequency Range: 500 MHz,Time Base Error: 5334B 10 /year Frequency Standard Frequency: 10 MHz,Time Base Error: 5061B /year Signal Generator Frequency Range : 1 MHz to 500 MHz, SSB 8642B/8644B/8663A <...

  • Page 166: Setting Up The System

    Table 5-2. Adjustment and Correction Constants Items Adjustments and Correction Constants HP VEE Note Setting Up the System Adjustments...
  • Page 167 Figure 5-1. Adjustment Hardware Setup Adjustments...
  • Page 168 Installing an GPIB Card (82340 or 82341) Installing HP VEE for Windows NT Con gure I/O HP VEE for Windows NT Installing Adjustment Program into Your PC 4395A File HP VEE File - Open C:\4395A\ADJUST.VEE NNNNNNNN Note NNNNNNNNNNNNNNNNN Start NNNNNNNN NNNNNNNN...
  • Page 169 JP1E00123 NNNNNNNNNNNNNNNNNNNNNNNNNNNNN NEXT STEP Figure 5-2. List Box Note Post Repair Procedure Adjustments...

  • Page 170: Required Equipment

    Note Required Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Procedure Figure 5-3.
  • Page 171 Figure 5-4. Frequency Reference Adjustment Location Adjustments...
  • Page 172 Required Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 173 Figure 5-5. Oven Reference Adjustment Setup Figure 5-6. Location of the OVEN FREQ ADJ. Adjustments 5-11...
  • Page 174 5-12 Adjustments...
  • Page 175 Required Equipment Procedure NNNNNNNN Adjustments 5-13...
  • Page 176 Required Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Procedure NNNNNNNN...
  • Page 177 Required Equipment Procedure NNNNNNNN Adjustments 5-15...
  • Page 178 Note Required Equipment Procedure System NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE SERVICE TESTS ADJUSTMENT TESTS NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN EXECUTE TEST NNNNNNNNNNNNNN CONT NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN EXECUTE TEST NNNNNNNNNNNNNN CONT NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN EXECUTE TEST NNNNNNNNNNNNNN CONT NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN EXECUTE TEST NNNNNNNNNNNNNN CONT 5-16 Adjustments...
  • Page 179 NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN EXECUTE TEST NNNNNNNNNNNNNN CONT Figure 5-8. Input DC Offset Adjustment Location Adjustments 5-17...

  • Page 180: Service Tests

    Note Required Equipment Procedure System NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SERVICE TESTS ADJUSTMENT TESTS NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN EXECUTE TEST 5-18 Adjustments...
  • Page 181 Figure 5-9. Input Local Null Adjustment Location NNNNNNNNNNNNNN CONT Adjustments 5-19...
  • Page 182 Note Required Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Procedure System NNNNNNNNNNNNNN...
  • Page 183 Figure 5-11. IF 24 dB Gain/Phase Adjustment Location NNNNNNNNNNNNNN CONT Adjustments 5-21...
  • Page 184 Note Required Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 185 Figure 5-12. Receiver Gain Adjustment Setup Adjustments 5-23...
  • Page 186 Figure 5-13. Receiver Gain Adjustment Location 5-24 Adjustments...
  • Page 187 Required Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 188 Required Equipment Procedure NNNNNNNN 5-26 Adjustments...
  • Page 189 Required Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 190 Figure 5-16. Receiver Flatness Adjustment Setup ( 1 MHz) 5-28 Adjustments...
  • Page 191 Required Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Procedure NNNNNNNN Figure 5-17.
  • Page 192 Required Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :...
  • Page 193 Required Equipment : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Procedure...
  • Page 194 Figure 5-20. DC Bias Adjustment Setup 2 5-32 Adjustments...

  • Page 195: Troubleshooting

    Troubleshooting Post-Repair Procedures Post-Repair Procedures Troubleshooting...
  • Page 196 Figure 6-1. Troubleshooting Organization Troubleshooting...

  • Page 197: Performance Test Failure Troubleshooting

    INSPECT THE POWER-ON SEQUENCE INSPECT THE REAR PANEL FEATURE INTERNAL TESTS FAILURE TROUBLESHOOTING EXTERNAL TESTS FAILURE TROUBLESHOOTING Performance Test PERFORMANCE TEST FAILURE TROUBLESHOOTING Accessories Troubleshooting Troubleshooting...

  • Page 198: Internal Tests

    Check the Fan Power Requirements Power Supply Troubleshooting Check the Front Panel LEDs and Displays Ch 1 Digital Control Troubleshooting Check Error Message Digital Control Troubleshooting INTERNAL TESTS FAILURE TROUBLESHOOTING POWER ON TEST FAILED Error Messages Digital Control Troubleshooting Troubleshooting...
  • Page 199 Digital Control Troubleshooting Check the GPIB Interface Check the Parallel Interface Check the mini DIN Keyboard Connector Troubleshooting...

  • Page 200: Service Tests

    Check the Power-On Selftest POWER ON TEST FAILED Execute All Internal Tests POWER ON TEST FAILED PRESET SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SERVICE TESTS NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN EXECUTE TEST Execute the Individual Test PRESET SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SERVICE TESTS INTERNAL TESTS NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN EXECUTE TEST Note Troubleshooting...
  • Page 201 Table 6-1. Troubleshooting Information for Internal Test Failure Test First Failed Test Probable Faulty Assembly Troubleshooting...

  • Page 202: External Tests

    : Most suspicious assembly and should be checked repalced. : Suspicious assembly and should be checked. : There is some possibility of a fault. PRESET SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SERVICE TESTS EXTERNAL TESTS NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN EXECUTE TEST Table 6-2. Troubleshooting Information for External Test Failure Test Failed Test Probable Faulty Assembly...
  • Page 203 Perform Adjustments and Correction Constants Table 6-3. Troubleshooting Information for Performance Test Failure 1 Test Failed Test Adjustment Test Number Troubleshooting...
  • Page 204 Table 6-4. Troubleshooting Information for Performance Test Failure 2 Test Failed Test Probable Faulty Assembly : Most suspicious assembly and should be replaced. : Suspicious assembly and should be checked. : There is some possibility of a fault. 6-10 Troubleshooting...

  • Page 205: Power Supply Troubleshooting

    Power Supply Troubleshooting Troubleshooting Post Repair Procedures Post Repair Procedures Power Supply Troubleshooting...
  • Page 206 Figure 7-1. Power Supply Lines Simplified Block Diagram Power Supply Troubleshooting...
  • Page 207 1. Check the Fan is Rotating FIND OUT WHY THE FAN IS NOT ROTATING Check the A50 SHUTDOWN LED. 2. Check the A50 SHUTDOWN LED A50 SHUTDOWN FIND OUT WHY THE A50 SHUTDOWN LED IS OFF Check the A1 +5 VD LED Figure 7-2.
  • Page 208 A50 Shutdown LED Note 3. Check the A1 +5 VD LED FIND OUT WHY THE A1 +5 VD LED IS NOT ON STEADILY Measure the A1 +5 VD Voltage Figure 7-3. A1 +5 VD LED Location Power Supply Troubleshooting...
  • Page 209 Measure the A1 +5 VD Voltage FIND OUT WHY THE A1 LED IS NOT ON STEADILY Power Supply Troubleshooting...
  • Page 210 1. Check the Line Voltage, Selector Switch Setting, and Fuse Power Requirements Figure 7-4. Removing Line Fuse 2. Check the A50 SHUTDOWN LED TROUBLESHOOT THE FAN AND THE A50 DC-DC Converter Power Supply Troubleshooting...
  • Page 211 FIND OUT WHY THE FAN IS NOT ROTATING 1. Disconnect the Cable from the A1J10 Remove Assemblies 2. Remove Assemblies Disconnect the Cable from the A9J2 3. Disconnect the Cable from the A9J2 Power Supply Troubleshooting...
  • Page 212 Figure 7-5. A1 CPU Connector Locations Power Supply Troubleshooting...
  • Page 213 1. Check the A40 Pre-Regulator Check the A50 DC-DC Converter Figure 7-6. A40J1 Output Voltage 2. Check the A50 DC-DC Converter Power Supply Troubleshooting...
  • Page 214 Disconnect Cables on the A1 CPU 3. Disconnect Cables on the A1 CPU Figure 7-7. A1 CPU Connector Locations Remove Assemblies 7-10 Power Supply Troubleshooting...
  • Page 215 4. Remove Assemblies 5. Remove Assemblies Power Supply Troubleshooting 7-11...
  • Page 216 1. Troubleshoot the Fan Figure 7-8. Fan Troubleshooting Setup 7-12 Power Supply Troubleshooting...
  • Page 217 2. Troubleshoot the A50 DC-DC Converter Figure 7-9. A50 DC-DC Converter Troubleshooting Setup Power Supply Troubleshooting 7-13...
  • Page 218 Table 7-1. A50 Power Supplies Supply Connector Pin GND Connector Pin Range 7-14 Power Supply Troubleshooting...

  • Page 219: Digital Control Troubleshooting

    Digital Control Troubleshooting Troubleshooting Table of Related Service Procedures Post-Repair Procedures Digital Control Troubleshooting...
  • Page 220 Figure 8-1. Digital Control Group Simplified Block Diagram Digital Control Troubleshooting...
  • Page 221 Figure 8-2. A1 EEPROM Location Digital Control Troubleshooting...

  • Page 222: Installing The Firmware

    Ordering the Firmware Diskette Figure 8-3. Firmware Revision Label Installing the Firmware Start Preset Digital Control Troubleshooting...

  • Page 223: System Update

    Figure 8-4. Bootloader Menu Display NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN SYSTEM UPDATE CONTINUE NNNNNNNNNNNNNNNNNNNN REBOOT Digital Control Troubleshooting...
  • Page 224 1. Check the Power-On Sequence Ch 1 Ch 2 Check the Operations Ch 1 Ch 2 Check the A1 Eight LEDs. Ch 1 Ch 2 TROUBLESHOOT THE A51 GSP AND A52 LCD Check the A1 Eight LEDs Digital Control Troubleshooting...

  • Page 225: Start Here

    Figure 8-5. A1 Eight LEDs' Pattern 2. Check Error Messages Check A1 DRAM and Flash Memory START HERE. Error Messages POWER ON TEST FAILED Check Power On Selftest EEPROM CHECK SUM ERROR Adjustments EEPROM CHECK SUM ERROR POWER FAILED ON - - - - - - Power Supply Troubleshooting...
  • Page 226 POWER FAILED ON PostRegHot PHASE LOCK LOOP UNLOCKED Check the Power On Selftest 3. Check the A1 DRAM and Flash Memory Start Preset Check the A1 Volatile Memory Digital Control Troubleshooting...

  • Page 227: Service Menu

    Figure 8-6. Bootloader Display 4. Check the A1 Volatile Memory System NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SERVICE MENU TESTS EXECUTE TEST Check the A30 Front Keyboard. CPU INTERNAL SRAM R/W ERROR DSP SRAM R/W ERROR DUAL PORT SRAM R/W ERROR CPU BACKUP SRAM R/W ERROR Digital Control Troubleshooting...
  • Page 228 5. Check the A30 Front Keyboard PRESET SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SERVICE MENU TESTS EXECUTE TEST PRESET PRESET Check the A53 FDD 6. Check the A53 FDD PRESET SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SERVICE MENU TESTS EXECUTE TEST NNNNNNNNNNNNNN CONT 7. Check the A32 I-BASIC Interface and the mini DIN Keyboard PRESET SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN...
  • Page 229 8. Check the A33 EXT I/O Interface PRESET SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SERVICE MENU TESTS EXECUTE TEST Digital Control Troubleshooting 8-11...
  • Page 230 1. Run the Internal Test 3: A51 GSP. Ch 1 Ch 2 PRESET SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SERVICE MENU TESTS EXECUTE TEST Ch 1 Ch 2 Ch 1 Ch 2 Check the Two LEDs on A51 GSP. 2. Check the A52 LCD(Liquid Crystal Display) PRESET SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN...

  • Page 231: Accessories Troubleshooting

    Accessories Troubleshooting VERIFY OPERATIONS INSPECT CONNECTORS INSPECT ACCESSORIES Accessories Troubleshooting...
  • Page 232 Operation Manual Programming Manual Using 75 Connectors with 50 Connectors Large Spurious Signals in the Spectrum Measurement Odd Appearing Opens and Shorts in the Network Measurement Verify Shorts and Opens Inspect the Calibration Kit Accessories Troubleshooting...
  • Page 233 Replaceable Parts Accessories Troubleshooting...
  • Page 234 Verify the Probe Power Inspect the Test Set Inspect the Calibration Kit Verify the Probe Power Power Supply Troubleshooting Accessories Troubleshooting...
  • Page 235 Figure 9-1. Probe Power Connector Voltages Inspect the Test Set PRESET Meas NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER TYPE NETWORK ANALYZER Refl: REV S22(B/R) NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN Refl: FWD S11 (A/R) Inspect the Calibration Kit Verify Shorts and Opens Modifying Calibration Kits NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN Function Reference MODIFY [CAL KIT] Accessories Troubleshooting...

  • Page 236: Smith Chart

    Format NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SMITH CHART Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ELEC DELAY MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ELECTRICAL DELAY Scale Ref NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ELEC DELAY MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN ELECTRICAL DELAY Accessories Troubleshooting...
  • Page 237 Replaceable Parts Direct Mail Order System Replaceable Parts 10-1...
  • Page 238 12085 SCHLEGEL CORP ROCHESTER NY US 14692 13160 TEAC OF AMERICA INC MONTEBELLO CA US 90640 28480 AGILENT TECHNOLOGIES CO CORPORATE HQ PALO ALTO CA US 94304 28520 HEYCO MOLDED PRODUCTS KENTWORTH NJ US 07033 73734 FEDERAL SCREW PRODUCTS CO...
  • Page 239 Table 10-2. List of Abbreviations Replaceable Parts 10-3...
  • Page 240 Figure 10-1. Top View (Major Assemblies) 10-4 Replaceable Parts...
  • Page 241 Table 10-3. Top View (Major Assemblies) Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-5...
  • Page 242 Figure 10-2. Bottom View (Major Assemblies) Table 10-4. Bottom View (Major Assemblies) Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-6 Replaceable Parts...
  • Page 243 Figure 10-3. Angle Assembly Parts 1/5 Table 10-5. Angle Assembly Parts 1/5 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-7...
  • Page 244 Figure 10-4. Angle Assembly Parts 2/5 Table 10-6. Angle Assembly Parts 2/5 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-8 Replaceable Parts...
  • Page 245 Figure 10-5. Angle Assembly Parts (Opt. 001) 3/5 Table 10-7. Angle Assembly Parts (Opt. 001) 3/5 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-9...
  • Page 246 Figure 10-6. Angle Assembly Parts 4/5 Table 10-8. Angle Assembly Parts 4/5 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-10 Replaceable Parts...
  • Page 247 Figure 10-7. Angle Assembly Parts 5/5 Table 10-9. Angle Assembly Parts 5/5 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-11...
  • Page 248 Figure 10-8. Front Assembly Parts 1/8 Table 10-10. Front Assembly Parts 1/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-12 Replaceable Parts...
  • Page 249 Figure 10-9. Front Assembly Parts 2/8 Table 10-11. Front Assembly Parts 2/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-13...
  • Page 250 Figure 10-10. Front Assembly Parts 3/8 Table 10-12. Front Assembly Parts 3/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-14 Replaceable Parts...
  • Page 251 Figure 10-11. Front Assembly Parts 4/8 Table 10-13. Front Assembly Parts 4/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-15...
  • Page 252 Figure 10-12. Front Assembly Parts 5/8 Table 10-14. Front Assembly Parts 5/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-16 Replaceable Parts...
  • Page 253 Figure 10-13. Front Assembly Parts 6/8 Table 10-15. Front Assembly Parts 6/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-17...
  • Page 254 Figure 10-14. Front Assembly Parts 7/8 Table 10-16. Front Assembly Parts 7/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-18 Replaceable Parts...
  • Page 255 Figure 10-15. Front Assembly Parts 8/8 Table 10-17. Front Assembly Parts 8/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-19...
  • Page 256 Figure 10-16. Rear Assembly Parts 1/8 Table 10-18. Rear Assembly Parts 1/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-20 Replaceable Parts...
  • Page 257 Figure 10-17. Rear Assembly Parts 2/8 Table 10-19. Rear Assembly Parts 2/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-21...
  • Page 258 Figure 10-18. Rear Assembly Parts 3/8 Table 10-20. Rear Assembly Parts 3/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-22 Replaceable Parts...
  • Page 259 Figure 10-19. Rear Assembly Parts 4/8 Table 10-21. Rear Assembly Parts 4/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-23...
  • Page 260 Figure 10-20. Rear Assembly Parts 5/8 Table 10-22. Rear Assembly Parts 5/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-24 Replaceable Parts...
  • Page 261 Figure 10-21. Rear Assembly Parts (Opt. 1D5) 6/8 Table 10-23. Rear Assembly Parts (Opt. 1D5) 6/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-25...
  • Page 262 Figure 10-22. Rear Assembly Parts 7/8 Table 10-24. Rear Assembly Parts 7/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-26 Replaceable Parts...
  • Page 263 Figure 10-23. Rear Assembly Parts 8/8 Table 10-25. Rear Assembly Parts 8/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-27...
  • Page 264 Figure 10-24. Main Frame Assembly Parts 1/23 Table 10-26. Main Frame Assembly Parts 1/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-28 Replaceable Parts...
  • Page 265 Figure 10-25. Main Frame Assembly Parts 2/23 Table 10-27. Main Frame Assembly Parts 2/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-29...
  • Page 266 Figure 10-26. Main Frame Assembly Parts (FDD Assembly) 3/23 Table 10-28. Main Frame Assembly Parts (FDD Assembly) 3/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-30 Replaceable Parts...
  • Page 267 Figure 10-27. Main Frame Assembly Parts (FDD Assembly) 4/23 Table 10-29. Main Frame Assembly Parts (FDD Assembly) 4/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-31...
  • Page 268 Figure 10-28. Main Frame Assembly Parts 5/23 Table 10-30. Main Frame Assembly Parts 5/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-32 Replaceable Parts...
  • Page 269 Figure 10-29. Main Frame Assembly Parts 6/23 Table 10-31. Main Frame Assembly Parts 6/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-33...
  • Page 270 Figure 10-30. Main Frame Assembly Parts (A20 Motherboard Assembly) 7/23 Table 10-32. Main Frame Assembly Parts (A20 Motherboard Assembly) 7/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-34 Replaceable Parts...
  • Page 271 Figure 10-31. Main Frame Assembly Parts 8/23 Table 10-33. Main Frame Assembly Parts 8/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-35...
  • Page 272 Figure 10-32. Main Frame Assembly Parts 9/23 Table 10-34. Main Frame Assembly Parts 9/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-36 Replaceable Parts...
  • Page 273 Figure 10-33. Main Frame Assembly Parts (A1 CPU Board Assembly) 10/23 Table 10-35. Main Frame Assembly Parts (A1 CPU Board Assembly) 10/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-37...
  • Page 274 Figure 10-34. Main Frame Assembly Parts 11/23 Table 10-36. Main Frame Assembly Parts 11/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-38 Replaceable Parts...
  • Page 275 Figure 10-35. Main Frame Assembly Parts 12/23 Table 10-37. Main Frame Assembly Parts 12/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-39...
  • Page 276 Figure 10-36. Main Frame Assembly Parts (A9 Input Multiplexer Assembly) 13/23 Table 10-38. Main Frame Assembly Parts (A9 Input Multiplexer Assembly) 13/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-40 Replaceable Parts...
  • Page 277 Figure 10-37. Main Frame Assembly Parts 14/23 Table 10-39. Main Frame Assembly Parts 14/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-41...
  • Page 278 Figure 10-38. Main Frame Assembly Parts 15/23 Table 10-40. Main Frame Assembly Parts 15/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-42 Replaceable Parts...
  • Page 279 Figure 10-39. Main Frame Assembly Parts (Pre-regulator Assembly) 16/23 Table 10-41. Main Frame Assembly Parts (Pre-regulator Assembly) 16/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-43...
  • Page 280 Figure 10-40. Main Frame Assembly Parts (A50 DC-DC Converter Assembly) 17/23 Table 10-42. Main Frame Assembly Parts (A50 DC-DC Converter Assembly) 17/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-44 Replaceable Parts...
  • Page 281 Figure 10-41. Main Frame Assembly Parts (A5 and A7 Assemblies) 18/23 Table 10-43. Main Frame Assembly Parts (A5 and A7 Assemblies) 18/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-45...
  • Page 282 Figure 10-42. Main Frame Assembly Parts (A2 DC Bias Assembly) 19/23 Table 10-44. Main Frame Assembly Parts (A2 DC Bias Assembly) 19/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-46 Replaceable Parts...
  • Page 283 Figure 10-43. Main Frame Assembly Parts (YTO Assembly) 20/23 Table 10-45. Main Frame Assembly Parts (YTO Assembly) 20/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-47...
  • Page 284 Figure 10-44. Main Frame Assembly Parts (YTO Assembly) 21/23 Table 10-46. Main Frame Assembly Parts (YTO Assembly) 21/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-48 Replaceable Parts...
  • Page 285 Figure 10-45. Main Frame Assembly Parts (YTO Assembly) 22/23 Table 10-47. Main Frame Assembly Parts (YTO Assembly) 22/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Replaceable Parts 10-49...
  • Page 286 Figure 10-46. Main Frame Assembly Parts 23/23 Table 10-48. Main Frame Assembly Parts 23/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number 10-50 Replaceable Parts...

  • Page 287: Post Repair Procedures

    Post Repair Procedures Post Repair Procedures Adjustments Performance Tests Table 11-1. Post Repair Procedures Replaced Adjustments Veri cation Assembly or Part Correction Constants A1 CPU Firmware Installation. INSPECT THE POWER ON SEQUENCE Internal Test 2: A1 VOLATILE MEMORY A1 EEPROM Local DAC Adjustment INSPECT THE POWER ON SEQUENCE Source Power Adjustment All Performance Test Items...
  • Page 288 Table 11-1. Post Repair Procedures (continued) Replaced Adjustments Veri cation Assembly or Part Correction Constants A2 DC Bias DC Bias Adjustment INSPECT THE POWER ON SEQUENCE DC Bias Test A3 Tracking Source Local DAC Adjustment INSPECT THE POWER ON SEQUENCE Source Flatness Adjustment Frequency Accuracy Source Level/Flatness Non-sweep Linearity...
  • Page 289 Table 11-1. Post Repair Procedures (continued) Replaced Adjustments Veri cation Assembly or Part Correction Constants A7 Freq. Converter Frequency Reference Adjustment INSPECT THE POWER ON SEQUENCE Source Power Adjustment Frequency Accuracy Source Flatness Adjustment Source Level/Flatness Receiver Gain Adjustment Non-sweep Linearity IF 8 dB/16 dB Gain Adjustment Power Sweep Linearity Receiver Flatness Adjustment...
  • Page 290 Table 11-1. Post Repair Procedures (continued) Replaced Adjustments Veri cation Assembly or Part Correction Constants A9 Input Multiplexer Input DC O set Adjustment INSPECT THE POWER ON SEQUENCE Input Local Null Adjustment Receiver Noise Level Receiver Gain Adjustment Input Crosstalk IF 8 dB/16 dB Gain Adjustment Input Impedance Receiver Flatness Adjustment Absolute Amplitude Accuracy...

  • Page 291: Manual Changes

    Manual Changes yellow MANUAL CHANGES MANUAL CHANGES MANUAL CHANGE *IDN? GPIB Command Reference *IDN? Table A-1. Manual Changes by Serial Number Serial Pre x or Number Make Manual Changes Manual Changes...

  • Page 292: Make Manual Changes

    Table A-2. Manual Changes by Firmware Version Version Make Manual Changes Manual Changes...
  • Page 293 Figure A-1. Front Assembly Parts 3/7 Table A-3. Front Assembly Parts 3/7 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Manual Changes...
  • Page 294 Figure A-2. Front Assembly Parts 4/7 Table A-4. Front Assembly Parts 4/7 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Manual Changes...
  • Page 295 Figure A-3. Front Assembly Parts 5/7 Table A-5. Front Assembly Parts 5/7 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Manual Changes...
  • Page 296 Figure A-4. Front Assembly Parts 6/7 Table A-6. Front Assembly Parts 6/7 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Manual Changes...
  • Page 297 Figure A-5. Main Frame Assembly Parts (FDD Assembly) 3/23 Table A-7. Main Frame Assembly Parts (FDD Assembly) 3/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Note Manual Changes...
  • Page 298 Figure A-6. Front Assembly Parts 5/8 Table A-8. Front Assembly Parts 5/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Manual Changes...
  • Page 299 Figure A-7. Rear Assembly Parts 7/8 Table A-9. Rear Assembly Parts 7/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Manual Changes...

  • Page 300: Fuse Selection

    Fuse Selection Table A-10. Fuse Selection Fuse Rating/Type Fuse Part Number A-10 Manual Changes...
  • Page 301 Figure A-8. Front Assembly Parts 3/8 Table A-11. Front Assembly Parts 3/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Manual Changes A-11...
  • Page 302 Figure A-9. Front Assembly Parts 4/8 Table A-12. Front Assembly Parts 4/8 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number A-12 Manual Changes...
  • Page 303 Figure A-10. Top View (Major Assemblies) Manual Changes A-13...
  • Page 304 Table A-13. Top View (Major Assemblies) Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number A-14 Manual Changes...
  • Page 305 Figure A-11. Main Frame Assembly Parts (A5 and A7 Assemblies) 18/23 Table A-14. Main Frame Assembly Parts (A5 and A7 Assemblies) 18/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Manual Changes A-15...
  • Page 306 Figure A-12. Main Frame Assembly Parts (YTO Assembly) 20/23 Table A-15. Main Frame Assembly Parts (YTO Assembly) 20/23 Ref. Agilent Part Qty. Description Mfr Part Desig. Number Code Number Note A-16 Manual Changes...
  • Page 307 Figure A-13. Serial Number Plate Manual Changes A-17...

  • Page 309: Power Requirement

    Power Requirement Fuse Selection Table B-1. Fuse Selection Fuse Rating/Type Fuse Part Number Open the cover of AC line receptacle on To check or replace the fuse, pull the fuse the rear panel using a small minus holder and remove the fuse. To reinstall screwdriver.

  • Page 310: Power Cable

    Power Cable Warning For protection from electrical shock, the power cable ground must not be defeated. The power plug must be plugged into an outlet that provides a protective earth ground connection. Power Requirement...
  • Page 311 Figure B-1. Power Cable Supplied Power Requirement...

  • Page 313: Error Messages

    Error Messages CAUTION: CAUTION: Messages-1...

  • Page 314: Programming Manual

    Error Messages in Alphabetical Order Programming Manual Messages-2...
  • Page 315 Error Messages in Alphabetical Order NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN COUPLED CH GPIB only LIMSDON SDON Programming Manual Messages-3...
  • Page 316 Error Messages in Alphabetical Order GPIB only EDITLIST EDITLIML LIMSDON SDON GPIB only. Messages-4...
  • Page 317 Error Messages in Alphabetical Order Messages-5...
  • Page 318 Error Messages in Alphabetical Order Messages-6...
  • Page 319 Error Messages in Alphabetical Order *SRE4 Messages-7...
  • Page 320 Error Messages in Alphabetical Order SENSE& GPIB only *RST:TRIG Messages-8...
  • Page 321 Error Messages in Alphabetical Order *SRE *SRE NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN RESUME CAL SEQUENCE NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SCALE FOR [DATA] NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MARKER ON [DATA] OUTPERRO? NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN FIXED 1MKR VALUE FIXED 1MKR AUX VALUE NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MKR1 SEARCH RNG NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MKR1 SPAN Messages-9...
  • Page 322 Error Messages in Alphabetical Order NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SCALE FOR [MEMORY] NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MARKER ON [MEMORY] .DTA .STA .DTA GPIB only Messages-10...
  • Page 323 Error Messages in Alphabetical Order GPIB only Programming Manual *OPT? *SRE *SRE 4,16 Messages-11...
  • Page 324 Error Messages in Alphabetical Order ERRM$ ERRN Messages-12...
  • Page 325 Error Messages in Alphabetical Order Service Manual Messages-13...
  • Page 326 Error Messages in Alphabetical Order Messages-14...
  • Page 327 Error Messages in Alphabetical Order *TRG *XYZ Messages-15...
  • Page 328 Error Messages in Numerical Order 0 - 100 OUTPERRO? NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN RESUME CAL SEQUENCE GPIB only. Messages-16...
  • Page 329 Error Messages in Numerical Order Messages-17...
  • Page 330 Error Messages in Numerical Order GPIB only GPIB only Programming Manual *OPT? GPIB only EDITLIST EDITLIML LIMSDON SDON GPIB only LIMSDON SDON Programming Manual Messages-18...
  • Page 331 Error Messages in Numerical Order Programming Manual NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MARKER ON [DATA] NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MARKER ON [MEMORY] NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MKR1 SPAN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MKR1 SEARCH RNG Messages-19...
  • Page 332 Error Messages in Numerical Order NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN FIXED 1MKR VALUE FIXED 1MKR AUX VALUE 101 - 200 GPIB only .DTA .STA .DTA NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SCALE FOR [DATA] NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SCALE FOR [MEMORY] Messages-20...
  • Page 333 Error Messages in Numerical Order NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN COUPLED CH Messages-21...
  • Page 334 Error Messages in Numerical Order 201 - 300 Messages-22...
  • Page 335 Error Messages in Numerical Order 101 - SENSE& *RST:TRIG *SRE *SRE 4,16 Messages-23...
  • Page 336 Error Messages in Numerical Order *SRE *SRE *SRE4 *XYZ Messages-24...
  • Page 337 Error Messages in Numerical Order Messages-25...
  • Page 338 Error Messages in Numerical Order 201 - *TRG Messages-26...
  • Page 339 Error Messages in Numerical Order Messages-27...
  • Page 340 Error Messages in Numerical Order ERRM$ ERRN 301 - Service Manual Messages-28...
  • Page 341 Error Messages in Numerical Order 401 - Messages-29...
  • Page 343 REGIONAL SALES AND SUPPORT OFFICES For more information about Agilent Technologies test and measurement products, applications, services, and for a current sales office listing, visit our web site: http://www.agilent.com/find/tmdir. You can also contact one of the following centers and ask for a test and measurement sales representative.

Table of Contents