Query response
Example
Syntax
Parameter
Query response
Example
0 | 1 <newline><^END>
OUTPUT @Hp4155;":HCOP:ITEM:PNUM:STAT ON"
OUTPUT @Hp4155;":HCOP:ITEM:PNUM:STAT?"
ENTER @Hp4155;A
:HCOPy:ITEM[:WINDow]:TEXT:STATe
This command sets whether the GRAPH TEXT (marker and cursor coordinate
values, data variables, and line parameters) should be plotted or printed when the
:HCOPy:IMMediate command or :HCOPy:DATA? query is sent.
At *RST, the value of this parameter is ON.
:HCOPy:ITEM [ :WINDow] :TEXT:STATe OFF | ON | 0 | 1
Parameter
Type
OFF or 0
boolean
ON or 1
boolean
This command has meaning only when :HCOPy:DEVice:LANGuage is set to
HP-GL. If set to PCL, GRAPH TEXT is always printed or plotted.
0 | 1 <newline><^END>
OUTPUT @Hp4155;":HCOP:ITEM:TEXT:STAT ON"
OUTPUT @Hp4155;":HCOP:ITEM:TEXT:STAT?"
ENTER @Hp4155;A
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:HCOPy:ITEM[:WINDow]:TEXT:STATe
Explanation
GRAPH TEXT is not plotted or printed.
GRAPH TEXT is plotted or printed.
SCPI Commands
5-47