Page:scontrol:standby - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Query response
Example
SCPI Commands

:PAGE:SCONtrol:STANdby

:PAGE:SCONtrol:STANdby
This command controls the output of standby channels.
This command can be executed only when the present state is IDLE or STANDBY.
But the query can be executed for any state.
Executing this command is about the same as pressing Standby front-panel key.
At *RST, this value is OFF.
:PAGE:SCONtrol:STANdby OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":PAGE:SCON:STAN ON"
OUTPUT @Hp4155;":PAGE:SCON:STAN?"
ENTER @Hp4155;A
:PAGE:SCONtrol:STATe?
This command returns the present state of the 4155C/4156C.
This command has query form only.
:PAGE:SCONtrol:STATe?
IDLE | STAN | MEAS | STR <newline><^END>
Parameter Type
IDLE character
STAN character
MEAS character
STR character
OUTPUT @Hp4155;":PAGE:SCON:STAT?"
ENTER @Hp4155;A$
5-244 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
change to IDLE state
change to STANDBY state
Explanation
IDLE state
STANdby state
MEASurement state
STRess state