Page:stress[:Cdefinition]:Smu<N>:Mode - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
SCPI Commands
:PAGE:STRess[:CDEFinition]:SMU<n>:MODE
:PAGE:STRess[:CDEFinition]:SMU<n>:MODE
This command sets the output MODE of SMU<n> for stress.
<n> is required to specify SMU number. Valid SMU numbers are SMU1 through
SMU6, depending on the configuration.
At *RST, this value is:
SMU1
SMU2 to SMU4
SMU5 and SMU6
:PAGE:STRess [ :CDEFinition] :SMU<n>:MODE V | I | COMMon
Parameter Type
V character
I character
COMMon character
V | I | COMM | DIS <newline><^END>
If SMU is not used, the response data may be DIS (DISable).
OUTPUT @Hp4155;":PAGE:STR:SMU1:MODE V"
OUTPUT @Hp4155;":PAGE:STR:SMU1:MODE?"
ENTER @Hp4155;A$
5-258 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SMU OUTPUT MODE
COMMon
V
not defined.
Explanation
voltage output mode
current output mode
common