Hcopy:item:all:data; Hcopy:item:all[:Immediate]; Hcopy:item:annotation:state - Agilent Technologies 4155C Command Reference Manual

Syntax
Query response
Syntax
Example
Syntax
Parameter
Query response
SCPI Commands

:HCOPy:ITEM:ALL:DATA?

:HCOPy:ITEM:ALL:DATA?
This command returns hardcopy (PCL or HP-GL) data of all output items, including
items not selected by the :HCOPy:ITEM subsystem commands.
This command has query form only.
:HCOPy:ITEM:ALL:DATA?
#0{data element} <newline><^END>
Response is in indefinite length arbitrary block response data format.

:HCOPy:ITEM:ALL[:IMMediate]

This command immediately plots or prints all output items, including items not
selected by the :HCOPy:ITEM subsystem commands.
This command does not have query form.
:HCOPy:ITEM:ALL [ :IMMediate]
OUTPUT @Hp4155;":HCOP:ITEM:ALL"

:HCOPy:ITEM:ANNotation:STATe

This command sets whether the title of the print or plot out (TITLE) should be
plotted or printed when the :HCOPy:IMMediate command or :HCOPy:DATA?
query is sent.
At *RST, the value of this parameter is ON.
:HCOPy:ITEM:ANNotation:STATe OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
5-42 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
Title is not plotted or printed.
Title is plotted or printed.