System:ntmout - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
See also
SCPI Commands

:SYSTem:NTMOut

:SYSTem:NTMOut
This command sets the maximum time allowed to establish the connection with the
print server defined by the :SYST:COMM:NET:PRIN commands. The
4155C/4156C waits for the response from the printer server when the 4155C/4156C
requests hardcopy.
If the 4155C/4156C does not receive the response within the time specified by this
command, the 4155C/4156C occurs the timeout error.
*RST sets this parameter to 300 seconds. Query returns the present setting.
:SYSTem:NTMOut second
Parameter Type
second numeric
second <newline><^END>
second is NR1 response data.
OUTPUT @Hp4155;":SYST:NTMO 100"
OUTPUT @Hp4155;":SYST:NTMO?"
ENTER @Hp4155;A
:SYSTem:COMMunicate:NETwork:PRINter:NET commands
:SYSTem:COMMunicate:NETwork:PRINter:SET
5-326 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
Time to wait for the response from the print server.
1 to 32767 seconds in 1 second step.