System:communicate:network:filer:net:ipaddress - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example

:SYSTem:COMMunicate:NETwork:FILEr:NET:IPADdress

:SYSTem:COMMunicate:NETwork:FILEr:NET:IPAD
dress
This command is one of the commands to register the network drive setup. To
register a setup, the following commands must be entered:
• :SYSTem:COMMunicate:NETwork:FILEr:NET:NAME
• :SYSTem:COMMunicate:NETwork:FILEr:NET:IPADdress
• :SYSTem:COMMunicate:NETwork:FILEr:NET:DIRectory
• :SYSTem:COMMunicate:NETwork:FILEr:SET
You can register maximum 4 setups.
This command sets the IP address of your NFS server.
If you do not enter the :SYST:COMM:NET:FILE:SET command, *RST clears this
setting. Query returns the present setting.
:SYSTem:COMMunicate:NETwork:FILEr:NET:IPADdress ipaddress
Parameter Type
ipaddress string
ipaddress <newline><^END>
OUTPUT @Hp4155;":SYST:COMM:NET:FILE:NET:IPAD '172.0.0.1'
"
OUTPUT @Hp4155;":SYST:COMM:NET:FILE:NET:IPAD?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
IP address of the NFS server.
SCPI Commands
5-305