Page:glist[:Graphics]:Interpolate - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Example
SCPI Commands

:PAGE:GLISt[:GRAPhics]:INTerpolate

:PAGE:GLISt[:GRAPhics]:INTerpolate
This command selects whether interpolation mode of marker is on or off.
At *RST, this value is OFF.
:PAGE:GLISt [ :GRAPhics] :INTerpolate OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":PAGE:GLIS:INT ON"
OUTPUT @Hp4155;":PAGE:GLIS:INT?"
ENTER @Hp4155;A
:PAGE:GLISt[:GRAPhics]:LINE:CTMarker
This command moves the cursor to the marker's position.
This command does not have query form.
:PAGE:GLISt [ :GRAPhics] :LINE:CTMarker
OUTPUT @Hp4155;":PAGE:GLIS:LINE:CTM"
5-138 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
interpolation is off
interpolation is on