Page:glist[:Graphics]:Marker[:State] - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Example
Syntax
Example

:PAGE:GLISt[:GRAPhics]:MARKer[:STATe]

This command selects whether the marker is on or off.
At *RST, this value is OFF.
:PAGE:GLISt [ :GRAPhics] :MARKer [ :STATe] OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":PAGE:GLIS:MARK ON"
OUTPUT @Hp4155;":PAGE:GLIS:MARK?"
ENTER @Hp4155;A
:PAGE:GLISt[:GRAPhics][:MENU]
This command changes the present display page to GRAPH/LIST: GRAPHICS.
This command does not have query form.
:PAGE:GLISt [ :GRAPhics] [ :MENU]
OUTPUT @Hp4155;":PAGE:GLIS"
:PAGE:GLISt[:GRAPhics]:SCALing:AUTO
This command redraws the present graphic display with appropriate scale to plot the
data in the plotting area.
This command does not have query form.
:PAGE:GLISt [ :GRAPhics] :SCALing:AUTO ONCE
OUTPUT @Hp4155;":PAGE:GLIS:SCAL:AUTO ONCE"
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:GLISt[:GRAPhics]:MARKer[:STATe]
Explanation
marker is off
marker is on
SCPI Commands
5-143