System:communicate:network[:Self]:Ipaddress - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example

:SYSTem:COMMunicate:NETwork[:SELF]:IPADdress

This command is one of the commands to register the 4155C/4156C network setup.
To register the 4155C/4156C network setup, enter the following commands:
• :SYSTem:COMMunicate:NETwork[:SELF]:NAME
• :SYSTem:COMMunicate:NETwork[:SELF]:IPADdress
• :SYSTem:COMMunicate:NETwork[:SELF]:USERid
• :SYSTem:COMMunicate:NETwork[:SELF]:GROUpid
This command sets the IP address assigned to the 4155C/4156C.
*RST has no effect on the value of this parameter. Query returns the present setting.
:SYSTem:COMMunicate:NETwork [ :SELF] :IPADdress ipaddress
Parameter Type
ipaddress string
IP address <newline><^END>
OUTPUT @Hp4155;":SYST:COMM:NET:SELF:IPAD '127.0.0.3'"
OUTPUT @Hp4155;":SYST:COMM:NET:SELF:IPAD?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:SYSTem:COMMunicate:NETwork[:SELF]:IPADdress
IP address for the 4155C/4156C.
SCPI Commands
Explanation
5-317