Hcopy:abort; Hcopy:data; Hcopy:destination - Agilent Technologies 4155C Command Reference Manual

Syntax
Example
Syntax
Query response
Example
SCPI Commands

:HCOPy:ABORt

:HCOPy:ABORt
This command aborts the current print or plot operation.
This command does not have query form.
:HCOPy:ABORt
OUTPUT @Hp4155;":HCOP:ABOR"

:HCOPy:DATA?

This command returns hardcopy (PCL or HP-GL) data of the plot or print out.
The items to be returned have been selected by :HCOPy:ITEM subsystem
commands.
This command has query form only.
:HCOPy:DATA?
#0{data element} <newline><^END>
Response is in indefinite length arbitrary block response data format.
Refer to Programmer's Guide.

:HCOPy:DESTination

This command selects the print or plot destination.
If you use a remote printer via your print server, set the 4155C/4156C network setup
and network printer setup on the SYSTEM: MISCELLANEOUS page, or enter the
:SYST:COMM:NET:SELF commands and the following commands before
executing this command.
• :SYST:COMM:NET:PRIN:NET:NAME
• :SYST:COMM:NET:PRIN:NET:IPAD
• :SYST:COMM:NET:PRIN:NET:TEXT
• :SYST:COMM:NET:PRIN:NET:GRAP
• :SYST:COMM:NET:PRIN:NET:TYPE
• :SYST:COMM:NET:PRIN:SET
5-36 Agilent 4155C/4156C SCPI Command Reference, Edition 1