Standard Event Status Enable Register - Agilent Technologies 4155C Command Reference Manual

Status Reporting Structure

Standard Event Status Enable Register

Standard Event Status Enable Register
The Standard Event Status "Enable" Register is an 8-bit register that can be used by
the program to select which bits of Standard Event Status Register are enabled. The
enabled bits are ORed together, and reported to the ESB bit (Bit5) of the Status Byte
Register.
The 8 bits of this register correspond to the 8 bits of the Standard Event Status
Register. Refer to Figure 3-4.
3-8 Agilent 4155C/4156C SCPI Command Reference, Edition 1