Calibration:auto - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
SCPI Commands

:CALibration:AUTO

:CALibration:AUTO
This command sets whether the instrument automatically performs calibration every
30 minutes.
At *RST, this value is set to OFF.
:CALibration: AUTO OFF | ON | 0 | 1
Parameter Type
OFF or 0 boolean
ON or 1 boolean
0 | 1 <newline><^END>
OUTPUT @Hp4155;":CAL:AUTO ON"
OUTPUT @Hp4155;":CAL:AUTO?"
ENTER @Hp4155;A
5-6 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
Do not perform auto calibration
Perform auto calibration