Mmemory Subsystem - Agilent Technologies 4155C Command Reference Manual

SCPI Commands

MMEMory Subsystem

The MMEMory (Mass MEMory) subsystem provides mass storage capabilities.
You can select one from the available mass memory devices: internal memory,
built-in flexible disk drive and file system on your NFS server. But the internal
memory is a restricted mass memory device, which has only four fixed names
(MEM1, MEM2, MEM3, MEM4) and their file extensions for data type (MES, STR, DAT
or MAT).
The following table is a command tree of MMEMory subsystem.
Command
:MMEMory
:CATalog?
:CDIRectory
:COPY
:DELete
:DESTination
:INITialize
:LOAD
:STATe
:TRACe
:MOVE
:NAME
:STORe
:SSHeet
:DELimiter
:LINDex
:SMARK
:UNIT
:STATe
:TRACe
5-62 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Parameter
[<msus>]
<dir_name> [,<msus>]
<file_name>, <file_name> | <file_name>,
<msus>, <file_name>, <msus>
file_name [,msus]
INTernal | NET1 | NET2 | NET3 | NET4
{LIF | DOS}
<state_no>, <file_name> [,<msus>]
<label>, <file_name> [,<msus>]
<file_name>, <file_name> | <file_name>,
<msus>, <file_name>, <msus>
<file_name> [,<msus>]
<file_name>
SPACe | TAB | COMMa
<numeric>, <numeric>
NONE | DQUote | SQUote
OFF | ON | 0 | 1
<state_no>, <file_name> [,<msus>]
<label>, <file_name> [,<msus>]