Subsystem Command Syntax - Agilent Technologies 4155C Command Reference Manual

Functional Syntax Conventions
Program Message Syntax

Subsystem Command Syntax

Figure 1-2 shows the syntax of subsystem commands:
Figure 1-2 Subsystem Command Syntax
Query requires ? at the end of the command header.
Many command <mnemonic>s have both long and a short form. For example,
CHAN is the short form and CHANNELS is the long form of CHANnels.
Command <mnemonic> is not case sensitive, so ChAnNeLs is just as valid as
CHANNELS.
1-4 Agilent 4155C/4156C SCPI Command Reference, Edition 1