Syntax
Parameter
Example
Syntax
Parameter
Query response
Example
:PAGE:GLISt[:GRAPhics]:SCALing:ZOOM
This command zooms the graphic display around the present cursor position.
This command does not have query form.
:PAGE:GLISt [ :GRAPhics] :SCALing:ZOOM IN | OUT
Parameter
Type
IN
character
OUT
character
OUTPUT @Hp4155;":PAGE:GLIS:SCAL:ZOOM IN"
:PAGE:GLISt:LIST:ASELect
This command selects whether the Y axis of GRAPHICS page is Y1 or Y2 and
changes the setting by :PAGE:GLISt[:GRAPhics]:ASELect.
You use this command when you would like to assign data variables, which uses
line parameters of graphics, on list.
At *RST, this value is Y1.
:PAGE:GLISt:LIST:ASELect Y1 | Y2
Parameter
Type
Y1
character
Y2
character
Y1 | Y2 <newline><^END>
OUTPUT @Hp4155;":PAGE:GLISt:LIST:ASEL Y1"
OUTPUT @Hp4155;":PAGE:GLISt:LIST:ASEL?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:GLISt[:GRAPhics]:SCALing:ZOOM
Explanation
zoom in
zoom out
Explanation
y axis is Y1
y axis is Y2
SCPI Commands
5-145