Agilent Technologies 4155C Command Reference Manual page 119

Syntax
Parameter
Example
See also
This command does not have query form.
This command has no *RST state and you must use this command before printing or
plotting.
:HCOPy:DESTination PARallel | RDEVice | NET1 | NET2 | NET3 | NET4 |
MMEMory
Parameter Type
PARallel character
RDEVice character
NET1 character
NET2 character
NET3 character
NET4 character
MMEMory character
OUTPUT @Hp4155;":HCOP:DEST RDEV"
:MMEMory:NAME
:SYSTem:COMMunicate:NETwork[:SELF]
:SYSTem:COMMunicate:NETwork:PRINter:NET
:SYSTem:COMMunicate:NETwork:PRINter:SET
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
parallel port
GPIB port
printer set by :SYST:COMM:NET:PRIN:SET NET1
or assigned to the top softkey for the PRINTER field
on the SYSTEM: MISCELLANEOUS screen.
printer set by :SYST:COMM:NET:PRIN:SET NET2
or assigned to the second softkey for the PRINTER
field on the SYSTEM: MISCELLANEOUS screen.
printer set by :SYST:COMM:NET:PRIN:SET NET3
or assigned to the third softkey for the PRINTER
field on the SYSTEM: MISCELLANEOUS screen.
printer set by :SYST:COMM:NET:PRIN:SET NET4
or assigned to the fourth softkey for the PRINTER
field on the SYSTEM: MISCELLANEOUS screen.
Not make hardcopy. Outputs to a file in the mass
storage device specified by the :MMEM:DEST
command. File name is specified by
:MMEM:NAME command.
SCPI Commands
:HCOPy:DESTination
5-37