Agilent Technologies 4155C Command Reference Manual page 421

Error -222
Error -223
Error -224
Error -230
Error -231
Error -240
Error -241
Error -250
Error -251
Error -252
Data out of range
Interpreted value of the program was out of range as defined by the 4155C/4156C.
Too much data
Too many parameters for the 4155C/4156C was received.
Illegal parameter value
Illegal parameter value was received.
Data corrupt or stale
Possibly invalid data; new reading started but not completed since last access.
Data questionable
Measurement accuracy is suspect.
Hardware error
A hardware problem in the 4155C/4156C. This error message is reported if the
4155C/4156C cannot detect the more specific error -241.
Hardware missing
A program command or query could not be executed because of missing hardware;
for example, an option was not installed.
Mass storage error
A mass storage error occurred. This error message is reported if the 4155C/4156C
cannot determine the more specific errors -251 through -258.
Missing mass storage
A program command or query could not be executed because of missing mass
storage.
Missing media
A program command or query could not be executed because of a missing media.
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Error Messages
Execution Error
6-9