Page:measure[:Sweep]:Delay - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter
Query response
Example
SCPI Commands

:PAGE:MEASure[:SWEep]:DELay

:PAGE:MEASure[:SWEep]:DELay
This command sets the DELAY TIME of SMU.
At *RST, this value is 0.
:PAGE:MEASure [ :SWEep] :DELay delay_time | MINimum | MAXimum
Parameter Type
delay_time numeric
delay_time <newline><^END>
delay_time is NR3 response data type.
OUTPUT @Hp4155;":PAGE:MEAS:DEL 1.5"
OUTPUT @Hp4155;":PAGE:MEAS:DEL MIN"
OUTPUT @Hp4155;":PAGE:MEAS:DEL?"
ENTER @Hp4155;A
OUTPUT @Hp4155;":PAGE:MEAS:DEL? MAX"
ENTER @Hp4155;A
:PAGE:MEASure[:SWEep]:HTIMe
This command sets the HOLD TIME of sweep measurement.
At *RST, this value is 0.
:PAGE:MEASure [ :SWEep] :HTIMe hold_time | MINimum | MAXimum
Parameter Type
hold_time numeric
hold_time <newline><^END>
hold_time is NR3 response data type.
OUTPUT @Hp4155;":PAGE:MEAS:HTIM 1.5"
5-222 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
0 to 65.535 (s). Resolution: 100 ms.
Explanation
0 to 655.35 (s). Resolution: 10 ms.