Syntax
Parameter
Example
Syntax
Parameter
SCPI Commands
:MMEMory:STORe:SSHeet
:MMEMory:STORe:SSHeet
This command creates/stores the spreadsheet file (ASCII format) of the result data.
Before executing this command, do following:
•
Enter :MMEM:DEST to specify the mass storage device.
•
Enter :MMEM:STOR:SSH:DEL to specify the delimiter.
•
Enter :MMEM:STOR:SSH:LIND to specify the data index.
•
Enter :MMEM:STOR:SSH:SMARK to specify the string mark.
•
Enter :MMEM:STOR:SSH:UNIT to specify whether to include units.
This command does not have query form.
:MMEMory:STORe:SSHeet file_name
Parameter
Type
file_name
string
OUTPUT @Hp4155;":MMEM:STOR:SSH 'ASCDATA'"
:MMEMory:STORe:SSHeet:DELimiter
This command specifies the data delimiter (that separates result data) to use in the
spreadsheet file that is created by :MMEMory:STORe:SSHeet command.
At *RST, this value is SPAC.
:MMEMory:STORe:SSHeet:DELimiter SPACe | TAB | COMMa
Parameter
Type
SPACe
character
TAB
character
COMMa
character
5-74
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
file name
Explanation
space
tab
comma