System:communicate:network[:Self]:Groupid - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
SCPI Commands

:SYSTem:COMMunicate:NETwork[:SELF]:GROUpid

:SYSTem:COMMunicate:NETwork[:SELF]:GROUpid
This command is one of the commands to register the 4155C/4156C network setup.
To register the 4155C/4156C network setup, enter the following commands:
• :SYSTem:COMMunicate:NETwork[:SELF]:NAME
• :SYSTem:COMMunicate:NETwork[:SELF]:IPADdress
• :SYSTem:COMMunicate:NETwork[:SELF]:USERid
• :SYSTem:COMMunicate:NETwork[:SELF]:GROUpid
This command sets your group ID.
*RST sets the value to 100. Query returns the present setting.
:SYSTem:COMMunicate:NETwork [ :SELF] :GROUpid id
Parameter Type
id numeric
id <newline><^END>
id is NR1 response data.
OUTPUT @Hp4155;":SYST:COMM:NET:SELF:GROU 55"
OUTPUT @Hp4155;":SYST:COMM:NET:SELF:GROU?"
ENTER @Hp4155;A
5-316 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
ID number. 1 to 32767.