Syntax
Parameter
Query response
Example
Syntax
SCPI Commands
:PAGE:MEASure:SAMPling:SCONdition:EDELay
:PAGE:MEASure:SAMPling:SCONdition:EDELay
This command sets the ENABLE DELAY time for the stop condition of sampling
measurement.
:PAGE:MEASure:SAMPling:SCONdition:EDELay enable_delay | MINimum |
MAXimum
Parameter
Type
enable_delay
numeric
enable_delay <newline><^END>
enable_delay is NR3 response data type.
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:EDEL 1.0"
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:EDEL MAX"
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:EDEL?"
ENTER @Hp4155;A
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:EDEL? MAX"
ENTER @Hp4155;A
:PAGE:MEASure:SAMPling:SCONdition:EVENt
This command sets the EVENt to use with the NAME and THReshold to define the
stop condition of sampling measurement.
EVENt describes the relation between THReshold and the value of the NAME
variable.
:PAGE:MEASure:SAMPling:SCONdition:EVENt LOW | HIGH | ABSLow |
ABSHigh
5-216
Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
0 to (initial_interval ´ 32767)