Page:measure:qscv:cname - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example

:PAGE:MEASure:QSCV:CNAMe

This command sets the variable name of the measurement result data for the
Quasi-static CV measurements. The variable is available only for the Quasi-static
CV measurement mode. This command also has a query form.
At *RST, this value is set to CAP.
:PAGE:MEASure:QSCV:CNAMe name
:PAGE:MEASure:QSCV:CNAMe?
Parameter Type
name string
name <newline><^END>
OUTPUT @Hp4155;":PAGE:MEAS:QSCV:CNAME 'CDATA'"
OUTPUT @Hp4155;":PAGE:MEAS:QSCV:CNAME?"
ENTER @Hp4155;A$
Agilent 4155C/4156C SCPI Command Reference, Edition 1
:PAGE:MEASure:QSCV:CNAMe
Explanation
String of up to 6 alphanumeric characters.
The first character must be an alpha character.
SCPI Commands
5-189