Mmemory:destination - Agilent Technologies 4155C Command Reference Manual

Execution
Conditions
Syntax
Parameter
Query response
Example
See also

:MMEMory:DESTination

This command sets either the built-in flexible disk drive or the file system on your
NFS server as the mass storage device. You must enter this command before doing
file operation.
This command has no *RST state. This command also has a query form.
To use the file system on your NFS server, do one of below. The :MMEM:DEST
command makes the NFS mount immediately.
Set the 4155C/4156C network setup and network drive setup on the SYSTEM:
MISCELLANEOUS screen.
Enter the commands of the :SYST:COMM:NET:SELF group and the following
commands to set the 4155C/4156C network setup and network drive setup:
• :SYST:COMM:NET:FILE:NET:NAME
• :SYST:COMM:NET:FILE:NET:IPAD
• :SYST:COMM:NET:FILE:NET:DIR
• :SYST:COMM:NET:FILE:SET
:MMEMory:DESTination INTernal | NET1 | NET2 | NET3 | NET4
:MMEMory:DESTination?
See Table 5-1.
INT | NET1 | NET2 | NET3 | NET4 <newline><^END>
OUTPUT @Hp4155;":MMEM:DEST NET3"
OUTPUT @Hp4155;":MMEM:DEST?"
ENTER @Hp4155;A$
:SYSTem:COMMunicate:NETwork[:SELF]
:SYSTem:COMMunicate:NETwork:FILE:NET
:SYSTem:COMMunicate:NETwork:FILE:SET
Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:MMEMory:DESTination
5-67