Page:stress:force:status - Agilent Technologies 4155C Command Reference Manual

Syntax
Parameter
Query response
Example
Syntax
Parameter
Query response
SCPI Commands

:PAGE:STRess:FORCe:STATus

:PAGE:STRess:FORCe:STATus
This command resets the stress status (time and percent) to zero.
Query returns the stress time forced and percent completion of the stress duration
setting.
At *RST, stress time and percent are 0.
:PAGE:STRess:FORCe:STATus RESet
Parameter Type
RESet character
time, rate <newline><^END>
time and rate are NR3 response data type.
OUTPUT @Hp4155;":PAGE:STR:FORC:STAT RES"
OUTPUT @Hp4155;":PAGE:STR:FORC:STAT?"
ENTER @Hp4155;A,B
:PAGE:STRess:SETup:ACCumulate
This command sets the amount of stress that has already been forced to the device.
At *RST, this value is 0.
:PAGE:STRess:SETup:ACCumulate RESet | accumulate
Parameter Type
RESet character
accumulate numeric
accumulate <newline><^END>
accumulate is NR3 response data type.
5-264 Agilent 4155C/4156C SCPI Command Reference, Edition 1
Explanation
reset the status to zero
Explanation
reset accumulated time to zero
0 and above